Licensed Melbourne electrician inspecting a switchboard
Electrical

Vacant rental make-safe electrician Melbourne: what landlords need before the next tenant

Kevin · Licensed Electrician 5 min read

A vacant rental with hanging cables, missing smoke alarms or a stuffed safety switch is not “ready to let”. Make-safe is a licensed visit that leaves the property legal to energise, with a list of what still needs quoting.

The short version

  • A vacant rental with hanging cables, missing smoke alarms or a defeated safety switch is not ready to let.
  • Make-safe is a licensed visit that leaves the property legal to energise, with a list of what still needs quoting.
  • It is not a full rewire or a cosmetic refresh. It is the minimum safe state.
  • Agents and owners get a written report with photos for the file.
  • If a tradie or previous tenant left live bare wires, call before anyone turns the power on.

Why vacancies hide electrical problems

Between tenants, properties go through cleaning, repainting, carpet changes and small repairs. Each of those touches electrical fittings. Light fittings are removed and not replaced, powerpoint plates are painted over or cracked, smoke alarms are taken down for painting, and temporary lights stay on dodgy leads. A tenant may have added unlicensed work, such as a DIY powerpoint, an extension of a circuit or a light fitting wired in the wrong place. A vacant home also lets us isolate and test circuits without disturbing anyone.

Landlords and agents in Victoria carry responsibilities for electrical safety in rentals, including safety switches and working smoke alarms. See landlord compliance checklist Victoria 2026 and rental electrical safety check in Victoria.

What make-safe includes

  • Visual inspection of the switchboard, meter box, powerpoints, light fittings and visible wiring.
  • Testing of safety switches and recording results.
  • Capping or terminating exposed or hanging conductors.
  • Replacing cracked or damaged powerpoints, switches and covers where it is a simple like-for-like fix.
  • Checking smoke alarms and replacing or adding as needed, to current Victorian requirements. See smoke alarm laws in Victoria and where to install smoke alarms.
  • Making safe any obviously dangerous work by a previous occupant, such as a power board wired into a ceiling.
  • A written report with photos and a list of recommended work, split into urgent, recommended and optional.

What it is not

Make-safe is not a Certificate of Electrical Safety for a whole house, a full inspection of every cable in the walls, or a rewire. It does not replace a gas safety check or a plumbing inspection, though we can coordinate those. It will not cover cosmetic changes such as new lights unless you ask. If we find unsafe wiring that cannot be made safe on the spot, we isolate that circuit and quote the repair. A tidy report protects you if a dispute arises later.

Smoke alarms and safety switches

Vacant rentals often have missing alarms, flat batteries or alarms past their ten-year life. In Victoria, requirements depend on the age of the building and the type of alarm, and landlords generally need alarms that are working at the start of a tenancy. Interconnection and photoelectric type may be required. See hardwired vs battery smoke alarms and how many smoke alarms. Safety switches (RCDs) must work and be tested. A property with only ceramic fuses or no safety switches should be considered for an upgrade. See safety switch installation cost.

Gas and plumbing too?

A vacant property is a good moment to check gas appliances, hot water and basic plumbing. We can coordinate a gas safety check, a hot water test, a tap and toilet check, and a blocked drain look, using licensed trades. See gas safety check in Victoria rentals and property manager emergency trades.

What agents should supply

  • Access arrangements: keys, lockbox code or a contact who can let us in.
  • The owner’s authority and spending limit, or an approval process for urgent quotes.
  • Any previous electrical reports, certificates and incident notes.
  • Details on tenants who left and any known issues, such as tripping or a burnt smell.
  • A clear invoicing contact for the owner or the agency.

Cost guide for 2026

Guides only; the price depends on size, age and what we find.

  • Make-safe visit for a small unit, one to two hours: typically a call-out plus labour, often a few hundred dollars.
  • Larger house, more rooms and more testing: priced by time.
  • Smoke alarm replacement per alarm: modest, depending on type and whether hardwired.
  • Safety switch upgrade: from a few hundred dollars for a single device on a suitable board.
  • Follow-up repairs and upgrades: quoted separately with photos, so owners can approve what is needed.

Typical findings on a vacant visit

  • Light fittings removed during painting with live conductors left loose or capped in tape.
  • Powerpoint plates cracked or missing, leaving live parts exposed.
  • Smoke alarms missing, battery-flat or beyond their life.
  • A safety switch that has been bypassed, or a board with no safety switch at all.
  • Extension leads or power boards wired in as permanent fixtures.
  • Old ceiling fans, heaters or exhaust fans with perished wiring.
  • Signs of overheating at the switchboard or at a wall isolator for an old oven or hot water system.

We photograph each finding with its location, so the owner can approve fixes room by room. Turnaround is what agents care about most. When access is arranged, we can often complete a make-safe on the same day and issue the report that afternoon.

FAQ

Can I attend the open home with lights on via an extension lead?
No. If the power is off because it is unsafe, an extension lead from a neighbour or a generator is not a fix. We make it safe first.
Who is the client, agent or owner?
Either. We take instructions from the agent where authorised, and report to the owner when asked. We need clear approval for spend.
Smoke alarms, photo-electric, interconnected?
Requirements depend on the property. We advise on the type and number and install to suit.
Gas and plumbing too?
Yes, through licensed trades we coordinate. You get one point of contact.
Short-stay vs long-term?
Short-stay rentals have extra expectations around safety and turnaround time. See short-stay rental electrical compliance.
Is make-safe the same as an electrical safety check?
No. A safety check is more thorough and periodic. Make-safe gets a vacant property to a safe state fast.

See electrical, smoke alarm installation and testing, annual smoke alarm safety check, electrician in Coburg and electrician in Doncaster.

Vacant rental needs making safe?

Send the address and access details. We report with photos. Call 1300 24 11 47.

Need a Melbourne electrical technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.