A Certificate of Electrical Safety (CoES) is Victoria’s formal record that prescribed electrical work was carried out by a licensed electrician and tested to the required standard. If your Melbourne job involves new circuits, alterations, switchboard changes or many hardwired installations, ask for the CoES before you pay the final invoice — it is not optional paperwork.
Need certified electrical work?
Call 1300 24 11 47 — licensed Melbourne electricians quote CoES inclusions before work starts.
The short version
- A CoES documents that prescribed electrical work in Victoria was done by a licensed electrician and tested safely.
- Most new work and alterations need a certificate — like-for-like minor repairs may sit outside some prescriptions, but ask rather than assume.
- The electrician who did the work issues the CoES; homeowners do not self-certify DIY wiring.
- Keep the certificate with property records — buyers, insurers and agents often ask for it.
- Quotes that exclude certification without explanation are a red flag.
What a Certificate of Electrical Safety actually is
In Victoria, Energy Safe Victoria (ESV) oversees electrical safety licensing and the certificate system that sits around prescribed work. A CoES is the electrician’s declaration that the work described was completed and tested in line with the Electricity Safety Act framework and applicable standards. It is not a blanket warranty on every wire in the house — it relates to the work that was performed and tested on that job.
Practically, the process includes installation or alteration work, mandatory testing (insulation resistance, polarity, earth continuity and RCD function where relevant), documentation of the work, and lodging or issuing the certificate according to the category of work. Your electrician should explain which certificate type applies to your job.
When Melbourne homeowners typically need a CoES
| Job type | Usually needs CoES? | Notes |
|---|---|---|
| New power circuit or subcircuit | Yes | Includes EV charger circuits |
| Switchboard upgrade / RCD additions | Yes | Common Melbourne compliance job |
| Hardwired smoke alarm install | Often yes | Depends on scope of prescribed work |
| New oven / cooktop circuit | Yes | High-load dedicated circuits |
| Like-for-like power point swap (same location) | Ask | May be minor; confirm with electrician |
| Fault finding / make-safe only | Depends | If alterations follow, CoES may apply |
Melbourne renovations in Richmond, Brunswick and Hawthorn frequently trigger certificates because opening walls reveals undersized circuits that must be altered, not merely reconnected. Apartment fit-outs in the CBD and Docklands often need certificates plus owners corporation approvals before works start.
What the certificate does — and does not — prove
It does prove
- A licensed electrician took responsibility for the described work.
- Required tests were performed for that work.
- There is a paper trail for compliance, sale and insurance questions.
It does not prove
- That every older circuit in the home meets modern standards.
- That appliances plugged in later are safe.
- That a future DIY modification remains compliant.
If you are buying a property, a recent CoES for a switchboard upgrade is useful evidence — but it is not a full pre-purchase electrical inspection. Those are separate scopes.
Homeowner checklist before you approve electrical work
- Confirm the tradesperson is a licensed electrician for Victoria.
- Ask whether the quoted scope requires a CoES.
- Confirm whether the certificate fee is included or itemised.
- Get the scope in writing: circuits, fittings, board changes.
- After completion, receive the certificate and store it with property files.
- If the job expanded mid-visit, ask whether the certificate still covers the final scope.
⚠ Unlicensed electrical work
DIY mains electrical work and unlicensed “mates rates” wiring are illegal and dangerous in Victoria. A CoES cannot legitimise work done by someone who was not licensed to do it. If you suspect illegal wiring, stop using the circuit and call a licensed electrician.
Costs and timing in Melbourne
Certificate costs vary with the category and volume of work. On small alterations the certificate line item may be modest relative to labour; on larger switchboard or multi-circuit jobs it is a clearer separate fee. After-hours emergency make-safe visits may focus first on making the installation safe, with certification following once rectification work is completed and tested. Always clarify this sequencing on the phone so you are not surprised.
For official guidance on certificates and inspections, see Energy Safe Victoria’s certificates page.
Common CoES myths we hear on Melbourne jobs
- “It’s only for new builds.” Alterations in existing homes regularly require certificates.
- “The supplier’s warranty replaces the CoES.” Product warranties and safety certificates are different documents.
- “The builder’s paperwork covers everything.” Electrical certificates still come from the licensed electrician for the electrical portion.
- “I can skip it to save money.” Skipping prescribed certification is not a legitimate saving — it creates legal and insurance exposure.
How 24/7 Service Mate handles CoES work
When you call us for installations, switchboard upgrades or alterations, we tell you upfront whether a Certificate of Electrical Safety applies and how it appears on the quote. We complete required testing before handover and provide the documentation for your records. Emergency attendance prioritises make-safe; where further prescribed work is approved, certification follows the completed scope — not a vague promise to “sort paperwork later.”
Prescribed work categories homeowners actually encounter
Victorian homeowners rarely speak in “prescribed work” language, but the jobs map cleanly onto everyday quotes. Adding a dedicated circuit for an induction cooktop in a Malvern kitchen, relocating lights during a Brunswick open-plan renovation, installing hardwired smoke alarms on a new upper level, or replacing a ceramic fuse board with RCBO protection all sit in the certification conversation. Fault finding that ends with “we tightened one screw and left” may not need a CoES. Fault finding that ends with “we replaced three breakers and altered the board layout” usually does.
Ask your electrician to narrate the boundary in plain English: what was inspected, what was altered, and what document you will receive. If two trades touch related systems — for example an HVAC outdoor isolator plus an electrician’s circuit — clarify who certificates which portion so nothing falls between scopes.
Buying, selling and renovating with CoES on file
Conveyancers and building inspectors in Melbourne increasingly ask for evidence of recent electrical alterations. A CoES for a switchboard upgrade completed last year is stronger than a verbal assurance that “everything was done properly.” During staged renovations, keep certificates with dated invoices for each stage: temporary make-safe, board upgrade, then final lighting and power alterations. Mixing stages without paperwork creates gaps that appear at sale time when nobody can remember which contractor did the bathroom circuit.
Owner-builders and owner-renovators should be especially careful. Coordinating tilers and cabinet makers is one skill set; ensuring licensed electrical work and certificates is another. Do not let programme pressure push unlicensed “temporary power” into walls that will be plastered shut.
Testing that sits behind the certificate
A CoES is not a rubber stamp. Behind it sits insulation resistance testing, polarity checks, earth continuity verification and RCD performance checks where relevant. That is why a proper job takes longer than a purely cosmetic fitting swap. If an electrician offers to “skip testing to save time,” walk away. The certificate’s value is the testing and the licensed declaration, not the PDF filename.
FAQ
- Who issues a Certificate of Electrical Safety in Victoria?
- A licensed electrician responsible for the prescribed work. Homeowners and unlicensed handymen cannot issue a valid CoES.
- Do I need a CoES to sell my Melbourne home?
- Sale processes vary, but buyers’ inspectors and conveyancers often ask about recent electrical work. Keeping certificates for upgrades and alterations avoids last-minute scrambles.
- Is a CoES the same as an electrical safety check?
- No. A safety check inspects the condition of an installation. A CoES certifies specific prescribed work that was carried out and tested.
- What if my electrician never mentioned a certificate?
- Ask before work starts. If the job is prescribed work, certification should be part of the professional process. Silence is not a good sign.
- Can one certificate cover multiple jobs over months?
- Certificates relate to defined work. Separate stages of a renovation may need separate documentation. Confirm with your electrician as scopes change.
Related reading
Explore our Melbourne electrical services or see what is included in electrical fault finding and repairs. For more practical detail, read Annual Smoke Alarm Safety Check Victoria: Landlord & Homeowner Guide and Safety Switch Trips at Night Melbourne: Finding the Fault That Keeps Cutting Power.
Ask about CoES before the job starts
Call 1300 24 11 47 — we itemise certification clearly so Melbourne electrical work stays legal, tested and documented.