Electricity is invisible until something goes wrong — and when it does, it can be catastrophic. These simple habits from our licensed Melbourne electricians could save your home and your life.
As emergency electricians, we attend hundreds of callouts every year that could have been prevented — or at least caught much earlier — with some basic electrical awareness. This isn't about being paranoid. It's about knowing what to look for and when to act.
Here are the electrical safety habits every Melbourne homeowner should build into their routine.
1. Test Your Safety Switches Quarterly
A safety switch (RCD) is only useful if it actually works. They can and do fail — particularly in older installations or after surge events. Testing takes 30 seconds and could save your life.
How to test: Open your switchboard and find the device with a "TEST" button (usually labelled "RCD" or with a T symbol). Press the button. The switch should trip immediately, cutting power to the protected circuits. Reset by flipping it back to the ON position.
If it doesn't trip, or won't reset — call a licensed electrician. That safety switch is not protecting you.
Energy Safe Victoria recommends testing every 3 months.
2. Don't Overload Power Points or Powerboards
Overloading is one of the most common causes of electrical fires in Australian homes — and it's entirely preventable.
Each power point circuit in your home has a maximum load rating, typically 10 amps (2,400 watts). Piggyback adaptors and cheaply-made powerboards can allow you to physically connect more than the circuit can safely handle.
Rules to follow:
- Never daisy-chain powerboards (plug a powerboard into another powerboard)
- Avoid using double-adaptor plugs
- High-draw appliances (heaters, air fryers, microwaves) should plug directly into wall outlets — not powerboards
- If a powerboard or adaptor feels warm to the touch — replace it immediately
3. Act Immediately on Warning Signs
Your home's electrical system communicates when something is wrong. Most people ignore the signs until the situation becomes serious. Don't.
Call a licensed electrician if you notice:
- Any burning smell from a power point, switchboard, or appliance
- Scorch marks or discolouration around a power point
- A power point or switch that feels warm or hot
- Sparking when you plug something in
- Flickering or dimming lights (not caused by a loose bulb)
- A buzzing or humming sound from the walls or ceiling
- A circuit that keeps tripping
These are not "minor issues to check when convenient." They are warning signs of faults that can cause fires or electrocution. Treat them as urgent.
4. Never DIY Licensed Electrical Work
In Victoria, it is illegal for an unlicensed person to perform any licensed electrical work. This includes:
- Installing or relocating power points or light switches
- Running new wiring or circuits
- Working inside the switchboard
- Replacing ceiling fans (the wiring connection)
- Installing hardwired smoke alarms
It's not just a legal issue. Unlicensed electrical work is a leading cause of house fires. It voids your home insurance. And the person who did the work (and potentially the homeowner who permitted it) can face significant fines.
The only electrical tasks a homeowner can legally do themselves in Victoria are changing light globes and replacing a power point faceplate (not the wiring). Everything else requires a licensed electrician.
5. Check Your Cords and Appliances Regularly
Damaged, frayed, or cracked electrical cords are a serious hazard. A cord with damaged insulation can arc to nearby materials, short circuit, or deliver a shock to anyone who touches it.
Do a quick visual check of the cords on your most-used appliances every few months:
- Are there any cracks, fraying, or exposed copper?
- Are any cords pinched under furniture or caught in doorways?
- Are any cords running under rugs or carpets? (friction causes heat build-up)
- Are appliance cords significantly coiled or bundled? (heat retention)
A damaged cord should be replaced, not repaired with electrical tape. Tape is not a permanent fix and is not safe for high-current appliances.
6. Water and Electricity: Strict Separation
This sounds obvious but we see violations constantly. Some important rules:
- Never use electrical appliances (including phones charging) near sinks, bathtubs, or water
- Ensure all outdoor power points have weatherproof covers
- If water has entered your switchboard or a power point (from flooding, a leak, or condensation) — turn off power at the main switch and call an electrician before turning it back on
- Bathroom and kitchen power points should be on RCD-protected circuits (mandatory in new builds, but often absent in older Melbourne homes)
7. Smoke Alarms: Check and Replace
Victorian law requires interconnected smoke alarms in all homes. They save lives — but only if they work.
- Test smoke alarms monthly using the test button
- Replace 9V battery alarms annually, or use 10-year lithium battery alarms
- Replace the entire alarm unit every 10 years (they degrade over time regardless of battery)
- Hardwired smoke alarms in older homes should be checked by a licensed electrician
Know What to Do in an Emergency
If you smell burning, see sparking, or suspect an electrical fire:
- Switch off the main switch at the switchboard (if you can do so safely)
- Do not use water on an electrical fire — use a dry powder extinguisher or evacuate
- Call 000 if a fire has started or someone has been electrocuted
- Call us on 1300 24 11 47 for emergency attendance once the immediate emergency is managed
If you're not sure whether something is an emergency — call us. We're available 24/7 and our team will help you assess it over the phone for free.
Worth doing: Book a safety inspection
If your home is more than 20 years old and the wiring hasn't been inspected recently, consider booking an electrical safety inspection. Our licensed electricians will check your switchboard, test your safety switches, inspect accessible wiring, and identify any issues — before they become emergencies.
Related reading
For local help, see our Melbourne electrical services, electrician in Richmond, electrician in Melbourne CBD. Our emergency electrician in Richmond page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency electrician in Richmond. Related guides: 6 signs your home is overdue for an electrical safety check, 60 practical energy-saving electrical tips for Melbourne homes.