Electrician costs in Melbourne typically start at $150–$350 for a standard call-out including initial fault finding, rising to $250–$600 or more for after-hours emergency attendance. The total depends on travel, access, fault complexity, parts, compliance testing and whether a Certificate of Electrical Safety is required.
Need a quote now?
Call 1300 24 11 47 — we give written pricing before work starts, day or night.
The short version
- Standard call-out in Melbourne: $150–$350, covering travel and the first 30–45 minutes of fault finding.
- After-hours emergency attendance: $250–$600 or more depending on time, suburb and fault severity.
- Hourly labour: typically $120–$180/hr for a licensed electrician; after-hours and weekend rates are higher.
- Parts, materials and any Certificate of Electrical Safety are itemised separately on a proper written quote.
- Always get a written scope before approving work beyond the initial fault-finding call-out.
Why Melbourne electrician prices vary so much
Two homeowners in the same suburb can receive very different bills for what sounds like the same job. That is not always because one electrician is overcharging. Electrical pricing reflects a number of real variables that change from job to job.
Urgency and time of call
An after-hours or emergency call carries a premium because the electrician has left outside normal working hours, often with no other job to combine the travel with. Weekend rates and public-holiday rates are typically even higher than standard after-hours pricing. If your job can wait until Monday morning, you will almost always pay less.
Travel distance and access
Electricians based in inner Melbourne can reach Brunswick, Richmond or Fitzroy quickly. Outer suburbs may attract a higher call-out component or longer travel time charged at the hourly rate. Access problems inside the property — ceiling voids too low to crawl, enclosed wall cavities, slab construction — also add time.
Fault complexity and diagnosis time
A tripped breaker with an obvious overloaded circuit is quick to diagnose. An intermittent fault that only shows up under load, or a wiring problem buried behind renovations, can take several hours to find and confirm safely. Melbourne’s older housing stock — Federation terraces, 1960s brick veneer, 1980s apartment blocks — often has decades of layered wiring that takes longer to navigate.
Parts and materials
The labour rate does not include parts. A replacement circuit breaker, new safety switch, LED fittings, conduit, cable, weatherproof power point, or data cable all go on the materials line. For small jobs this adds $20–$100. For a switchboard upgrade it can add $500–$1,500 depending on what is installed.
Compliance and certification
Victorian law requires a Certificate of Electrical Safety (CoES) for most new work and alterations. The certificate involves additional testing, paperwork and a fee that varies by job type and the volume of work. Your licensed Melbourne electrician is legally required to provide one where applicable — if a quote excludes it without explanation, ask why.
Switchboard condition
If an electrician opens the board and finds ceramic fuses, no safety switches, undersized conductors or evidence of DIY modifications, they may need to make things safe before completing the original job. This is not a upsell; it is a legal and safety obligation. A switchboard in poor condition will add cost to almost any electrical job.
Common Melbourne electrical job costs 2026
The ranges below reflect current Melbourne market pricing for a licensed, insured electrician. They are guides, not fixed prices — your actual quote will depend on your specific situation.
| Job | Typical Melbourne range | Main cost variable |
|---|---|---|
| Standard call-out + fault finding | $150–$350 | Travel distance, suburb |
| After-hours emergency call-out | $250–$600+ | Time of call, fault severity |
| Power point replacement (single) | $150–$300 | Access, board condition |
| New power point added to circuit | $300–$550 | Wall access, cable run |
| Safety switch (RCD) installation | $250–$500 | Switchboard space, board age |
| Ceiling fan installation — existing fitting | $200–$400 | Ceiling height, access |
| Ceiling fan installation — new circuit | $380–$650 | Cable run, switchboard capacity |
| Smoke alarm — single hardwired | $180–$350 | Existing wiring, ceiling type |
| LED downlight replacement (per light) | $80–$150 | Insulation contacts, quantity discount |
| EV charger installation (7.2 kW, level 2) | $1,200–$2,500 | Switchboard capacity, cable run length |
| Switchboard upgrade (fusebox to modern board) | $1,800–$4,500+ | Circuit count, meter position, safety switches |
| Outdoor weatherproof power point | $350–$650 | Wall type, cable routing, weatherproof rating |
Prices shown are for materials and labour. Certification, switchboard remediation and any after-hours components are in addition. Always confirm what is included in the quoted price before approving work.
Emergency electrician vs scheduled booking: which do you need?
One of the most common questions is whether a problem needs an electrician today or whether it can wait. The answer affects cost significantly.
Call an emergency electrician immediately if
- You can smell burning or see scorch marks at a power point, switch or board.
- You hear buzzing, crackling or popping from anywhere in the electrical system.
- Power is out to critical equipment and cannot be safely restored by resetting a breaker.
- A safety switch or breaker trips immediately on reset — particularly after rain or water exposure.
- There is visible arcing, sparking or melted plastic at any fitting.
- The main switch at the switchboard has tripped and will not hold.
Book a scheduled appointment if
- The job is routine: a replacement power point, new fitting, ceiling fan, or additional circuit.
- The fault is intermittent and the home remains safe while waiting.
- You need a safety inspection, smoke alarm check, or pre-purchase inspection on a timeline.
- Cost is a priority and the job does not present an immediate risk.
⚠ Stop and call 000 if
You see flames, smell smoke from wiring, or believe someone has received an electric shock. Do not attempt to reset any switch or touch the person until power is confirmed off.
What a fair electrician quote should include
A professional written quote does more than give you a number. It gives you a basis for comparing tradespeople and understanding exactly what you are paying for.
The scope of work
A clear description of what will be done — not just “electrical work” or “fault repair”. Ask for the cause identified, the proposed fix, and why that fix addresses the root cause rather than just the symptom.
What is and is not included
Does the quote include parts, or are they charged at cost plus a margin? Does it include certification? Is switchboard remediation included if required? Is the quote fixed or an estimate that can change on site?
Potential variations
Some jobs reveal additional issues once open: corroded connections, undersized wiring, a board that needs updating. A good electrician will explain what might change the price before work begins, not present a surprise invoice at the end.
Certification and test results
For any new electrical work or alterations in Victoria, a Certificate of Electrical Safety is required and must be provided by the licensed electrician who performed the work. This is not optional, and its cost should be included in or clearly disclosed in the quote. For more information see Energy Safe Victoria.
How 24/7 Service Mate handles pricing
When you call us, we ask a few questions before attending: what has happened, which suburb you are in, whether there are any urgent safety signs like burning or buzzing, and what you are hoping to achieve. That triage helps us give a realistic indication of whether the job is urgent and what range it is likely to fall in.
On site, the electrician diagnoses the fault first. Before any work beyond initial fault finding begins, we explain what we have found, what the fix involves, what it will cost including certification, and whether anything might change the price. We do not approve work on your behalf or proceed to materials without your sign-off.
For switchboard upgrades, EV charger installations, rewiring or larger compliance jobs, we provide a written quote to take away if needed. The goal is transparency before the invoice, not after. For licensing requirements, see the Victorian Building Authority.
FAQ
- Are there fixed-price electrical jobs in Melbourne?
- Some common jobs like power point replacements or ceiling fan installations can be quoted at a fixed price once the electrician has assessed the site. Fault finding is more often quoted at an hourly rate because the time required is unknown until the fault is found.
- Do electricians charge a call-out fee even if they cannot fix the problem on the day?
- Usually yes. The call-out fee covers travel and the initial assessment. If the fault requires specialist testing equipment, parts not on the van, or a return visit, the call-out is still charged. Confirm this upfront when booking.
- Why does after-hours electrical work cost more?
- After-hours attendance means the electrician leaves outside normal working hours, often without the ability to combine travel with other jobs. Award conditions and business overheads for emergency availability are real costs. The premium is typically 50–100% above the standard hourly rate.
- What is a Certificate of Electrical Safety?
- A CoES is a legal document required in Victoria for most new electrical work and alterations. It confirms the work was performed by a licensed electrician and tested to standard. Your electrician must provide one where required — if they do not mention it, ask.
- Should I get multiple quotes for electrical work?
- For larger jobs like switchboard upgrades, EV chargers or rewiring, getting two or three quotes is sensible. For small repairs or emergency attendance, the call-out cost usually outweighs the saving from shopping around. Compare quotes on scope, not just the bottom-line number.
Related reading
For more on Melbourne electrical services, start at our Melbourne electrical services hub. Local help is available through our Richmond electrician team and Melbourne CBD electricians. If your switchboard is ageing, read our guide to switchboard upgrade costs in Melbourne 2026. For safety switch and circuit breaker work, see our switchboard and safety switch upgrades service page.