Gas Log Fire Installation Cost Melbourne 2026
HVAC

Gas Log Fire Installation Cost Melbourne 2026

Kevin · Licensed Electrician 8 min read

Gas Log Fire Installation Cost Melbourne: the short version

Infographic summarising the key points of Gas Log Fire Installation Cost Melbourne 2026.
Gas log fires are one of Melbourne\

Gas log fires are one of Melbourne's most popular home heating upgrades — they combine the atmosphere of an open fire with the convenience of gas. But installation involves gas fitting, fluing, and electrical work, and the costs vary significantly by system type and installation complexity. Here's the full cost breakdown for Melbourne 2026.

Gas log fire types and prices

TypeHow it worksSupply price range
Flueless gas fire (decorative only)Burn gas inside room; not approved for enclosed spaces in VicNot recommended — not compliant for Victorian residential use
Balanced flue (sealed combustion)Draws combustion air from outside via coaxial flue through external wall$2,500–$6,000
Natural flue (open flue)Uses existing chimney or new flue to exhaust; draws air from room$2,000–$5,500
Direct vent (similar to balanced flue)Horizontal or vertical vent; sealed combustion chamber$3,000–$7,000

Total installation cost in Melbourne

ScenarioEstimated total cost
Existing gas point adjacent, wall penetration only (balanced flue)$3,500–$6,500
New gas point required from existing supply pipe$5,000–$8,500
New gas meter connection (no existing supply)$7,000–$12,000+
Using existing masonry chimney with flue liner$4,500–$9,000

These ranges include supply, gas fitting, flue installation, and electrical connection (for fan-forced or remote control models). Decorative surround, stone or tile work is separate.

What makes up the installation cost?

Gas fitting

All gas connections in Victoria must be performed by a licensed gasfitter. The gasfitter installs the connection to the existing gas supply, pressure-tests the installation, and must complete a compliance certificate (Form 4) after work is done. Labour typically costs $150–$220/hr, and gas point installations take 3–8 hours depending on distance from existing supply and wall material.

Flue installation

Balanced flue systems require penetration of the external wall for the coaxial flue tube. Single-storey brick or weatherboard homes are straightforward. Double-brick walls and upper storey installations are significantly more labour-intensive.

Electrical connection

Fan-forced models and models with remote control require a 240V GPO (power point) near the unit. If no GPO is present, a licensed electrician must install one. Typical cost: $150–$300.

Do I need planning permission or an owner's corporation approval?

In standard residential homes, a gas log fire installation does not require a building permit if it uses a balanced flue through a non-structural wall. However:

  • In apartments and townhouses with a body corporate (owners corporation), approval is typically required for any external penetration (flue)
  • In heritage overlay properties, external flue penetrations may need council approval
  • Using an existing chimney requires assessment that the flue is structurally sound and correctly lined

Victorian compliance requirements

Under Energy Safe Victoria gas appliance regulations, all gas log fires installed in Victoria must:

  • Be installed by a licensed gasfitter (Type A gasfitting)
  • Be tested and commissioned prior to use
  • Have a compliance certificate (Form 4) issued to the homeowner
  • Meet AS/NZS 5601.1 (Gas Installations) requirements

Beware of unlicensed gas fitters — a non-compliant gas installation is both dangerous and not covered by home insurance.

Running costs

Gas log fires used as zone heaters in Melbourne's winter (May–September) are efficient supplementary heaters. Running costs at Melbourne gas rates (~4–5c/MJ): a 5-star rated 5 kW gas log fire running 4 hours/day costs approximately $2.50–$3.50/day, or $450–$630 over a six-month winter season.

Gas log fire regulations and planning in Melbourne

VBA and Energy Safe Victoria requirements for gas log fire installation

A gas log fire installation in Melbourne requires a licensed gasfitter for all gas connection work (Type B gas fitting) and, in most cases, a licensed plumber or builder for the flue penetration through the ceiling or wall. Energy Safe Victoria (ESV) oversees gas safety in Victoria and requires all gas appliance installations to comply with AS/NZS 5601 (Gas Installations standard). The gasfitter must notify ESV of the installation and provide a Certificate of Compliance for the gas work. Ask your installer for this certificate — it is required documentation for your property records and may be required by your insurer.

Fireplace surrounds and building permits

A freestanding gas log fire or insert into an existing fireplace typically does not require a building permit. However, if new structural work is involved (creating a new fireplace opening, modifying a load-bearing wall, or building a new chimney breast), a building permit from your local Melbourne council is required. In heritage overlay properties, a planning permit may also be required. 24/7 Service Mate can advise on permit requirements during the quoting process.

Melbourne heritage homes and gas log fires

Open fireplaces are common in Melbourne’s pre-1940 terrace houses, Edwardian homes, and Californian bungalows. Converting an existing open fireplace to a gas log fire insert is a popular renovation that retains the heritage aesthetic while providing controllable warmth. The existing chimney provides the flue, but it must be inspected and, if required, lined with a stainless steel flue liner before the gas appliance is installed. The liner inspection and installation adds $400–$900 to the total cost but is mandatory for safe operation. 24/7 Service Mate can arrange both the flue assessment and gas installation in a single site visit.

Choosing the right gas log fire for your Melbourne home

The main choice is between a flued (vented) gas log fire and a flueless model. Flued fires are standard in Melbourne heritage homes with an existing chimney or where a new flue can be installed. Flueless models require no flue but must be sized correctly for the room (oxygen depletion sensors shut the fire off in insufficient ventilation), and some Melbourne councils restrict flueless gas heaters in certain settings. For new builds or renovations without an existing chimney, a balanced flue (through-wall horizontal flue) is often the most practical option.

Leading brands available and installed by 24/7 Service Mate include Rinnai, Escea, and Real Flame. Brand selection depends on aesthetic preference, BTU output required for the room size, and budget. Our techs can advise on the right unit for your room dimensions during a free on-site assessment. Call 1300 24 11 47 to book.

After installation, Energy Safe Victoria (ESV) recommends an annual gas appliance service for all gas log fires and heaters. A service includes cleaning the ceramic logs and firebox, checking the burner, testing the ignition system, and verifying the flue is clear and drawing correctly. Annual service cost is typically $150–$220. 24/7 Service Mate can schedule annual service reminders so you don’t need to remember. Call 1300 24 11 47 to book your installation or service today.

Whether you are replacing an open fireplace or installing a new gas fire from scratch, 24/7 Service Mate manages the full process including gas connection, flue, and ESV compliance paperwork.

FAQ

Can I install a gas log fire in a Melbourne apartment?
Apartments are more complex. Balanced flue models can be used, but external flue penetrations require owners corporation approval and are often rejected in stacked apartments. Ground-floor units may be feasible. A site inspection is essential before purchasing a system for an apartment.
Are gas log fires affected by Victoria's gas ban?
The Victoria gas ban (from 1 January 2024) applies to new residential builds — it prevents new gas connections. If your home already has a gas connection, you can still install a gas log fire. If your home does not have gas, you cannot get a new residential gas connection under current Victoria Building Regulations.

Gas log fire installation Melbourne

Licensed gasfitters for gas log fire supply and installation across Melbourne. Fixed-price quotes. Call 1300 24 11 47.

For local help, see our Melbourne electrical services, electrician in Richmond, electrician in Melbourne CBD. Our emergency electrician in Richmond page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency electrician in Richmond. Related guides: Ceiling fan installation cost Melbourne 2026, LED downlights Melbourne: replacement, fire safety, IC ratings and running costs.

Need a Melbourne hvac technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.