Electrician planning induction cooktop circuit
Electrical

Induction cooktop power requirements: do you need a new circuit?

Kevin · Licensed Electrician 5 min read

Induction cooktop power requirements: do you need a new circuit?

Infographic diagram for Induction cooktop power requirements: do you need a new circuit?.

Most full-size induction cooktops need a dedicated circuit. Before buying the appliance, check the rating plate, cable route and switchboard capacity.

Planning an induction upgrade?

Call 1300 24 11 47 before ordering the cooktop—we can assess your Melbourne home's circuit and switchboard capacity.

The short version

  • Most full-size induction cooktops require a dedicated circuit, not a spare kitchen outlet.
  • The appliance rating plate and installation manual determine the required supply; do not choose cable or breaker size by guesswork.
  • An existing oven circuit may be unsuitable for an oven and cooktop together.
  • Fixed appliance work in Victoria needs a licensed electrician and a CoES where required.

Why induction needs planning

Induction is efficient and responsive, but full-size cooktops can draw substantial current. They are not the same as plugging in a small benchtop appliance. The installation often needs a dedicated circuit from the switchboard, a local isolator and confirmation that the home can carry the extra demand when other major loads are operating.

What the electrician checks

  • Cooktop maximum demand and manufacturer instructions.
  • Existing oven/cooktop circuit rating.
  • Switchboard spare capacity and protection.
  • Cable route from board to kitchen.
  • Isolation switch location.

Common scenarios

Existing setupLikely requirement
Gas cooktop onlyNew dedicated circuit
Electric oven circuitMay not be enough for oven + induction
Old switchboardBoard upgrade may be needed first

Authority note

Fixed cooking appliance circuits are licensed electrical work. Check Energy Safe Victoria for Victorian electrical safety information.

Read the rating plate before buying

Marketing descriptions such as “60 cm induction cooktop” do not tell you the electrical requirement. Two similar-looking models can have different maximum connected loads, supply arrangements and power-limiting features. Give the electrician the exact model number, installation guide and desired installation date. This allows the circuit to be designed around the manufacturer’s instructions instead of discovering a mismatch after cabinetry, stone or tiling is complete.

Some models can be configured to cap their total output. That may help in a constrained property, but it also changes cooking performance and must only be used if the manufacturer permits it. It is not a licence to connect a high-load appliance to an undersized or shared circuit.

Do you need a new circuit for an induction cooktop?

Most induction cooktops need a dedicated circuit between 32A and 40A depending on kilowatt rating and manufacturer instructions. Dropping a 7kW+ appliance onto an existing kitchen ring circuit that already feeds the oven, dishwasher and microwave is a common cause of nuisance trips and overheated terminations.

What we check before install

  • Mains capacity and existing kitchen circuit configuration
  • Cable route from switchboard to cooktop isolator
  • Correct isolator within sight of the appliance
  • RCD/RCBO protection suitable for fixed appliance loads

Single-phase and three-phase supply

Many Melbourne homes have single-phase supply and can run a suitable induction cooktop perfectly well. Larger models or homes with substantial existing loads may benefit from a three-phase assessment, but three-phase is not automatically necessary. Where it is available, the electrician considers balanced loading across phases, the main switchboard, meter arrangements and the combined demand from air conditioning, pool equipment, EV charging and hot water.

In an apartment, access to the electrical riser, owners corporation requirements and existing metering can add planning time. Never assume a common-area or garage supply can be used for a private kitchen appliance.

Renovation sequencing

Builders often rough-in before cabinets. We prefer to confirm cooktop model and supply requirements before the stone bench goes on — moving an isolator or upsizing cable after tiling costs more. If you are replacing gas with induction, gas isolation and electrical upgrade should be planned together.

Typical upgrade costs

New dedicated circuit from an accessible board: often $650–$1,400 depending on cable length, access and board space. Switchboard upgrades are quoted separately if the mains or spare ways cannot support the load.

Three-phase homes

Large induction models on three-phase need balanced loading across phases — especially when pool and HVAC already share the board.

What happens on installation day

The electrician isolates the relevant supply, installs or verifies the circuit and isolator, makes the appliance connection in accordance with the manufacturer’s instructions, then tests the completed work. If the switchboard shows unsafe wiring, inadequate protection or insufficient capacity, that issue needs to be addressed before the cooktop is energised. A safe installation is more important than meeting the stone benchtop delivery deadline.

FAQ

Can I use the old oven circuit?
Sometimes, but only after the circuit rating, cable, protection and combined appliance load have been checked.
Do all induction cooktops need three-phase?
No. Many are designed for single-phase supply, although capacity still has to be assessed.
Can I plug an induction cooktop into a normal power point?
Only a portable appliance specifically supplied for that purpose. A built-in cooktop is a fixed appliance and normally needs a dedicated hardwired circuit.
Will induction trip my safety switch?
A correctly installed compatible appliance should not. Tripping indicates a fault, unsuitable circuit, moisture or another issue that should be diagnosed rather than repeatedly reset.
Do I receive a certificate for the work?
In Victoria, a licensed electrician provides a Certificate of Electrical Safety where the work requires one.

Make the electrical decision before the kitchen is finished

Confirm the appliance model and supply requirements early. It keeps the design realistic, avoids expensive rework and gives your new induction cooktop the reliable circuit it needs.

For local help, see our Melbourne electrical services, electrician in Richmond, electrician in Melbourne CBD. Our emergency electrician in Richmond page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency electrician in Richmond. Related guides: Dedicated circuits for high-power appliances: ovens, spas, EVs and workshops, Overloaded power points: how many appliances is too many?.

Need a Melbourne electrical technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.