Ducted air conditioning indoor unit installed in a Melbourne roofspace
HVAC

Ducted air conditioning installation cost Melbourne - full breakdown by home size

Andy · Licensed HVAC Technician 9 min read

Ducted air conditioning installation cost Melbourne: the short version

Infographic summarising the key points of Ducted air conditioning installation cost Melbourne - full breakdown by home size.

A typical Melbourne ducted air conditioning install in 2026 lands between $9,500 and $22,000. Two-bedroom homes start around $9,500; large 5-bedroom homes with 8-zone control reach $22,000+. The biggest variables are zone count, brand, ductwork access (slab vs roofspace) and whether your switchboard needs upgrading for the unit.

The short version

  • 2-bedroom apartment/townhouse: $9,500-$13,500.
  • 3-bedroom home: $11,500-$16,500.
  • 4-bedroom home with zones: $14,000-$19,500.
  • 5+ bedroom or two-storey: $17,000-$25,000+.
  • Add $1,200-$3,000 if your switchboard needs upgrading.

Price table by home size (Melbourne 2026)

Home sizeCapacity (kW)ZonesCost range
2-bed apartment / unit7-10kW3-4$9,500-$13,500
3-bed home single storey10-14kW4-5$11,500-$16,500
4-bed home single storey12-17kW5-6$14,000-$19,500
4-bed double storey14-20kW6-8$16,500-$22,000
5+ bed / large or older homes17-25kW7-10$19,000-$28,000

The 5 cost variables

1. Brand and inverter quality

The most common Melbourne brands - Daikin, Mitsubishi Electric, Fujitsu, ActronAir, Panasonic - have meaningful price gaps. Daikin and Mitsubishi Electric premium ducted units carry a $1,500-$3,500 premium over budget alternatives but deliver better COP/EER ratings, longer warranty terms, and quieter outdoor units. For a 15-20 year asset, that's usually worth it.

2. Zone count and zoning technology

Each zone needs its own damper, sensor, and control logic. Basic 3-4 zone setups are simpler; smart 6+ zone systems (MyAir, AirTouch, Polyaire Zonemaster Smart) add $1,500-$3,500 in zone hardware and controller cost. The upside: only run the rooms you're using, and individual room target temperatures. Worth it for any home over 4 bedrooms.

3. Slab vs roofspace install

Most Melbourne homes are roofspace - tile or colorbond roof with accessible cavity above the ceiling. That's the easiest install. Concrete slab single-storey homes need bulkhead chases or under-floor solutions, which add labour. Double-storey homes need vertical risers between floors, again more complex. Heritage homes with shallow roof spaces sometimes can't fit ducted at all.

4. Existing ductwork condition

If you have an old gas ducted heater being replaced with reverse-cycle, the existing ducts can sometimes be reused with new outlets and a new return air design. That saves $1,500-$3,500. But: if the ducts are R0.6 (uninsulated old style), R1.0 minimum is now standard and replacement is usually wiser than reuse.

5. Electrical work needed

A 14-20kW outdoor unit often draws more than a typical 32A circuit can supply. Your installer may need:

  • A dedicated 32A or 40A circuit ($350-$650)
  • A switchboard upgrade if there's no capacity ($1,800-$3,500)
  • Three-phase upgrade for units over 18kW ($3,500-$8,500)

Don't get a ducted quote without asking the installer to assess the switchboard at the same visit.

Ducted vs split system - when ducted wins

Split systems win on initial cost (a single 7kW split is $2,500-$3,800 installed), zone independence (the room either has one or it doesn't), and replaceability (much simpler to replace one head than retrofit a duct). Ducted wins on aesthetics (no wall units), whole-home comfort (one zone for "everything"), and operating efficiency at scale - one big inverter system running 70% load is cheaper than five small splits each running at 30%.

Real-world rule: under 3 bedrooms, splits often make more sense. Over 4 bedrooms, ducted is usually the right answer. The grey zone (3 bedrooms) depends on whether you live in the whole house at once.

What's included in a standard quote

A complete ducted quote should include:

  • Indoor fan coil unit
  • Outdoor condenser
  • R1.0 insulated flexible ducting to each outlet
  • Each outlet diffuser (round or linear)
  • Zone dampers and motors
  • Wall controller or smart controller
  • Return air grille and filter
  • Condensate drain to legal discharge point
  • Electrical connection (dedicated circuit)
  • Refrigerant pipework (max length specified)
  • Commissioning, testing and certification
  • 5-year parts/labour warranty (standard for major brands)

What's extra (and what should set off alarms)

Reasonable extras: switchboard upgrade if required, asbestos containment, scaffold for two-storey access, additional ducting runs over standard length (often 18-25m total). Unreasonable extras that should be in the original quote: condensate drain, return air grille, basic commissioning. If those appear as "additions" on the invoice, push back.

Rebates and energy-efficiency incentives Victoria 2026

The Victorian Energy Upgrades (VEU) program supports high-efficiency reverse cycle systems - typically $300-$900 off install through accredited providers. Solar Victoria's Home Heating and Cooling rebate covers gas-to-electric switches (replacing gas ducted with reverse-cycle ducted) up to $1,400 in 2026 - confirm current cap as policy updates regularly. Federal small renewable scheme STCs don't apply to ducted reverse-cycle. Ask your installer to itemise rebates separately so you can verify them.

How 24/7 Service Mate quotes ducted systems

Quote process: on-site visit to measure rooms, check roof space access, inspect switchboard, identify any ductwork reuse options. Heat-load calculation (Manual J or equivalent) for accurate sizing - not just bedroom count. Itemised quote with brand options, zoning options, and electrical work clearly listed. Rebate eligibility checked and presented as a net price option.

How long does ducted aircon installation take?

A standard ducted reverse-cycle installation in a Melbourne home typically takes 1–2 days for the main install (indoor unit, outdoor unit, ducts to each zone) plus a return visit for commissioning and zoning calibration. Larger homes (4+ bedrooms, two-storey) may take 3 days. 24/7 Service Mate works with licensed HVAC technicians holding the required ARC refrigerant handling licence — required by law for any refrigerant work in Australia.

FAQ

Can I reuse my old gas ducted ductwork?
Sometimes. Old uninsulated or R0.6 ducting should be replaced. Newer R1.0 ducting in good condition can often be reused if the design is right.
How long does the install take?
2-4 days for a typical Melbourne home, including ducting, electrical and commissioning.
Will my power bill go up?
Compared to no aircon, yes - but a high-COP system running zoned is more efficient than 5+ separate splits. Compared to gas ducted heating, electricity costs are similar in 2026 with rebates factored in.
What size unit do I actually need?
A heat-load calculation, not a "1kW per 10sqm" rule. Insulation, glazing, orientation, ceiling height and Melbourne climate all matter. A good installer does the calc properly.
How long do ducted systems last?
15-20 years for the outdoor and indoor units. Ductwork itself can last 25+ years if it stays sealed and uncrushed.

For local help, see our Melbourne HVAC services, HVAC in Frankston and HVAC in Box Hill. Our ducted air conditioning installation service page covers brands, warranty and install timelines. For a comparison with split systems, read AC blowing warm air in 35°C heat - 4 fixes you can try.

Considering ducted?

Call 1300 24 11 47 or book online for a free on-site assessment. We do the heat-load calc, check your switchboard, and present rebate-net pricing.

Need a Melbourne hvac technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.