24/7 Service Mate electrician installing electrical work at a Melbourne home
EV Charging

Home EV Charger Installation: A Melbourne Homeowner's Guide

Kevin · Licensed Electrician 6 min read

Level 1 plug versus dedicated Level 2

Comparison of a standard power point and a wall-mounted Level 2 EV charger.
A domestic socket on a general-purpose circuit is not designed for sustained 7kW EV charging — it overheats cables and trips breakers. A dedicated Level 2 circuit with correct cable size, RCD/RCBO protection and load assessment is the safe Melbourne standard. We check switchboard capacity before quoting so your charger and induction cooktop can coexist without nuisance trips. Related: EV charger installation

Home EV charger installation path

Flow from load assessment through dedicated circuit, charger mount and commissioning.
Before mounting a charger we assess available capacity, propose a dedicated circuit with the right cable and protection, install and test, then commission with the manufacturer app. Rebates and smart chargers add steps but the electrical path is the same — capacity first, then a compliant circuit, then handover with test results.

Picked up your new EV and wondering how to charge it at home properly? This guide covers everything — charger types, costs, switchboard requirements, government rebates, and what to ask your electrician.

Electric vehicle ownership in Victoria is growing rapidly — and one of the first questions new EV owners ask is: "Can I just plug it in at home?" The short answer is yes. But plugging a 7.2kW charger into a standard wall socket is a fire hazard, and you're leaving significant charging speed on the table.

This guide will walk you through everything you need to know to install a proper home EV charging solution in Melbourne.

Level 1 vs Level 2: What's the Difference?

Home EV charging comes in two levels:

Level 1 — Standard Power Point (10A)

Every EV comes with a "granny cable" that lets you charge from a standard 10-amp power point. This delivers around 2.3kW — enough to add roughly 15km of range per hour.

For a 60kWh battery (like a Tesla Model 3 Standard Range), a full charge from empty takes around 26 hours on Level 1. Fine for top-up overnight charging if you only drive short distances. Not practical for regular daily recharging.

Level 2 — Dedicated Wall Charger (32A)

A dedicated Level 2 home charger uses a 32-amp circuit (single-phase or three-phase) and delivers 7.2kW (single-phase) to 22kW (three-phase). That's 3–10x faster than plugging into a standard socket.

Most Melbourne homes are single-phase, which gives you 7.2kW — around 45km of range per hour. A 60kWh battery charges from empty in roughly 8 hours. Overnight. Every night.

This is the setup we recommend for almost all residential EV owners.

What Electrical Work Is Required?

Installing a dedicated Level 2 home charger requires:

  • A new 32A circuit run from your switchboard to the charging location (usually the garage)
  • A dedicated RCD/circuit breaker on that circuit at the switchboard
  • A switchboard assessment — to confirm there's capacity for the additional load
  • Possible switchboard upgrade if the current board can't accommodate the new circuit
  • A Certificate of Electrical Safety on completion

All of this work must be performed by a licensed electrician. The charger unit itself — the branded wall box — is typically supplied by you (or sourced through your installer) and physically mounted and wired by the electrician.

Which Charger Brand Should I Choose?

The market has matured significantly and most major brands are reliable. Common options in the Melbourne market include:

  • Zappi (myenergi) — popular for solar homes, built-in load management
  • Wallbox Pulsar Plus — compact, smart, good app
  • Tesla Wall Connector — ideal for Tesla owners, universal J1772 adapter available
  • Fronius Wattpilot — excellent solar integration, Austrian quality
  • EV Charger Australia (EVSE) — local Australian brand, good value

For most homeowners without solar, any quality 7.2kW smart charger will do the job. If you have or plan to install solar, consider a solar-integrated charger like the Zappi or Fronius that can prioritise charging from solar generation.

How Much Does It Cost?

Total installed cost varies based on switchboard condition, cable run distance, and charger brand. Typical Melbourne pricing:

  • Charger unit (supply only): $400–$900
  • Electrical installation (labour + materials, simple install): $400–$800
  • Switchboard upgrade (if required): $800–$2,500
  • Typical all-in cost (no switchboard upgrade needed): $900–$1,600

These are indicative prices. Your specific cost depends on the distance from the switchboard to the charger location, existing board capacity, and whether trenching or conduit work is needed for outdoor cable runs.

At 24/7 Service Mate, we provide a firm, fixed quote after a site assessment — no surprises.

Victorian Government EV Rebates

Victoria has run various EV incentive programs. As of early 2026:

  • Check the Victorian Government's EV rebate page for current offerings — programs change
  • Some charger manufacturers offer cashback programs — worth checking at point of purchase
  • The federal government's Electric Car Discount (FBT exemption) may apply if your employer provides your EV

We recommend checking vic.gov.au/electric-vehicles for current incentives before purchasing.

Do I Need Three-Phase Power?

Most Melbourne homes have single-phase power, which supports charging up to 7.2kW — fast enough for overnight charging in almost all cases. Three-phase allows charging up to 22kW, but the practical benefit at home is limited because you're usually charging overnight anyway and 7.2kW is already sufficient.

Three-phase makes more sense if you have a large battery (100kWh+), want to charge two EVs simultaneously, or need ultra-fast daytime top-ups. Upgrading from single-phase to three-phase is a more involved infrastructure job — it requires approval from your electricity distributor and is not a simple switch.

How to Choose the Right Installer

EV charger installation must be performed by a licensed electrician. Beyond that, look for:

  • Experience with EV charger installations specifically — not just general electricians who've done one or two
  • Upfront fixed pricing — avoid quotes that leave too many "potential extras"
  • Warranty support — will they stand behind the installation if something goes wrong?
  • Certificate of Electrical Safety — mandatory in Victoria, don't accept any job that doesn't provide one

At 24/7 Service Mate, we've installed home EV chargers for dozens of Melbourne homeowners. We'll assess your switchboard, recommend the right charger for your situation, and provide a fixed quote before any work begins.

Ready to get started? Call us on 1300 24 11 47 or request a quote online.

EV charger installation: what to expect on the day

Most home EV charger installations in Melbourne take 2–4 hours for a straightforward single-phase Level 2 charger with a clear cable route from the switchboard to the garage or carport. Here is the typical sequence so you know what to expect:

  1. The electrician assesses the switchboard for capacity and confirms a suitable breaker slot for the new circuit.
  2. The cable route from the switchboard to the charger mounting point is planned and confirmed — typically through the roof cavity or in conduit along an exterior wall.
  3. The charger is wall-mounted at the agreed height and orientation for convenient cable reach to the vehicle’s charging port.
  4. The dedicated circuit is wired, breaker installed, and all connections made and verified.
  5. The charger is commissioned, tested and any app pairing is completed.
  6. A Certificate of Electrical Safety (CES) is issued, which you may need for Solar Victoria rebate claims or insurance purposes.
Charger type Typical charge speed Circuit required Typical installed cost
Level 1 (10 A standard outlet)10–15 km/hrExisting 10 A circuit (no install needed)$0 (use existing outlet)
Level 2 (7 kW, single-phase)40–50 km/hrDedicated 32 A single-phase circuit$800–$1,400
Level 2 (11–22 kW, three-phase)60–120 km/hrDedicated three-phase circuit$1,200–$2,200+
Smart charger (load management)Variable — optimises with solar/gridDedicated circuit + smart meter integration$1,200–$2,500+

FAQ

Do I need to notify my energy retailer when installing an EV charger?
You do not need prior approval for a standard Level 2 home charger, but your electrician’s Certificate of Electrical Safety notifies the distribution network. If you are installing a three-phase charger or a smart charger with demand response features, it is worth contacting your retailer to discuss tariff options — some offer off-peak EV charging rates.
Can I get a Solar Victoria rebate for an EV charger?
Solar Victoria’s Battery Loan and solar programs do not directly fund EV chargers as standalone products, but the Victorian Government has offered EV charger rebates under separate programs. Check the Solar Victoria website for current availability — eligibility, amounts and program windows change regularly.
What is a smart charger and do I need one?
A smart charger connects to Wi-Fi and allows scheduling, energy monitoring, and integration with solar systems to prioritise charging from excess solar generation. For homes with solar panels, a smart charger can meaningfully reduce charging costs. For homes without solar, the scheduling function is still useful for overnight off-peak charging.
How long does an EV charger installation take?
A standard single-phase installation takes 2–4 hours for most homes. Three-phase or complex cable route installations may take 4–6 hours. If the switchboard needs upgrading to accommodate the new circuit, allow a half-day or full-day for the combined scope.
Will an EV charger affect my home insurance?
A licensed installation with a Certificate of Electrical Safety should not affect your home insurance in a negative way. Unlicensed self-installation of a permanent charger, however, could create issues with a claim. Always use a licensed electrician and keep the CES on file with your home documents.

Planning tip: Get your switchboard assessed first

Before you purchase a charger, have a licensed electrician assess your switchboard. If it needs upgrading, factor that cost into your budget. It's better to know upfront than to get a surprise on installation day.

For local help, see our Melbourne electrical services, electrician in Richmond, electrician in Melbourne CBD. Our power point and dedicated circuit installation page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency electrician in Richmond. Related guides: EV charger at home: 3 questions to ask before booking installation in Melbourne, Ceiling fan installation cost Melbourne 2026.

Need a Melbourne ev charging technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.