Before adding multiple high-load appliances, check whether your supply and switchboard can support them safely at the same time.
Adding an EV, induction or air conditioning?
Call 1300 24 11 47 for a Melbourne load assessment before committing to equipment.
The short version
- A load calculation looks at what can run together, not just the rating on one new appliance.
- EV chargers, induction cooktops, ducted air conditioning and spas can change a home’s peak demand.
- Some homes need a dedicated circuit or load management; others need supply or switchboard upgrades.
- Have capacity assessed before a builder closes walls or an appliance contract is final.
Loads that change the calculation
| Upgrade | Why it matters |
|---|---|
| EV charger | Large sustained load |
| Induction cooktop | High cooking demand |
| Ducted AC | Peak summer load |
| Heat pump hot water | Runs alongside other appliances |
| Spa or workshop | Dedicated circuit often required |
What the electrician assesses
Supply phase, main switch rating, existing circuit loads, diversity, cable size, switchboard space, safety switch protection and whether load management can avoid a bigger upgrade.
Single-phase vs three-phase
Many homes can stay single-phase with smart load management. Homes adding several large loads may need a three-phase assessment or staged upgrades.
Authority links
Use Energy Safe Victoria for licensed electrical work guidance and energy.gov.au for household energy context.
Load calculation matters before you add an EV charger, induction cooktop, ducted AC or workshop sub-board. Melbourne homes on 63A or 80A mains can look fine until summer peaks stack oven, AC, pool pump and EV charging on the same evening. We measure existing circuit loads, assess mains capacity and distributor rules, then tell you whether a dedicated circuit, load management or mains upgrade is the right fix.
Older terraces may still run split loads across multiple meters; apartments may have body-corp constraints on capacity increases. We map what is tenancy vs base building before quoting — especially in Southbank, Docklands and Richmond warehouse conversions. Written results help builders, designers and homeowners avoid signing appliance contracts the supply cannot support.
When distributors get involved
Mains upgrades above your allocated capacity require retailer and distributor applications. We provide load tables and scope letters builders can attach to permit paperwork — especially for dual-occupancy and subdivision projects.
Why nameplate ratings are not the answer
It is tempting to add every appliance rating and assume the total tells the story. A professional calculation instead considers demand, diversity, the way equipment cycles and the maximum likely simultaneous use. Your oven, ducted air conditioner and EV charger may not run at their maximum continuously, but a Melbourne summer evening can still create a high peak when cooking, cooling and charging overlap. The existing main switch, consumer mains, meter arrangement and cable sizes all matter as well.
We inspect the switchboard, identify current circuits and loads, and discuss the household’s intended end state. A “temporary” portable charger, new studio or planned pool equipment should be included. Planning the final picture avoids installing a circuit today only to rework the board or cable route next year.
Single phase, three phase and load management
Many existing Melbourne homes have single-phase supply and can support major upgrades with sensible circuit design. Three phase can provide more capacity and may be appropriate for extensive renovations, large HVAC systems, workshops or multiple dwellings, but it is not an automatic requirement for every EV charger or induction cooktop. Availability, distributor requirements, the incoming supply and project cost need to be assessed.
Load management is another option. A compatible charger or control system can reduce or pause charging when household demand is high, then resume when capacity is available. It can be an effective alternative where the calculation supports it, but it does not correct unsafe consumer mains, missing safety switches or an overloaded existing board. We explain the limits in writing before recommending it.
Apartment and renovation considerations
Apartment owners may have allocated capacity, embedded networks, body-corporate approvals and common-property cable routes to deal with. In Southbank, Docklands and older warehouse conversions, the constraint may be the building supply rather than the apartment board. For a renovation, coordinate the electrician early with the builder, kitchen designer and HVAC contractor. Cable pathways, meter locations and switchboard space are much cheaper to resolve before plaster and joinery are installed.
What you receive from an assessment
- A record of existing supply and switchboard observations.
- Recommended circuit, protection and cable scope for planned appliances.
- Advice on whether load management, board work or a distributor application is likely.
- A staged quote so you can compare doing the essential work now with preparing for future loads.
All fixed electrical work must be completed by a licensed electrician. Relevant work is tested and a Certificate of Electrical Safety (CoES) is issued where required in Victoria. For licensing and safety information, see Energy Safe Victoria.
FAQ
- Can I add loads one at a time?
- Yes, but an assessment based on the final expected load can prevent expensive repeat work.
- Does load management replace an upgrade?
- Sometimes. It depends on the measured and calculated demand, supply condition and appliance controls.
- Do I need three phase for an EV charger?
- Not necessarily. Many chargers work well on single phase; the home’s available capacity determines the appropriate solution.
- Will a new appliance need its own circuit?
- Often. High-load fixed appliances commonly need correctly sized dedicated circuits and protection.
- Can an electrician increase my supply capacity immediately?
- Not always. A mains upgrade may require retailer or distributor processes and coordination.
A load calculation is a small planning step that protects a much larger investment. It lets you choose appliances and renovation scope with a clear view of what your Melbourne home can safely support.
Related reading
For local help, see our Melbourne electrical services, electrician in Richmond, electrician in Melbourne CBD. Our emergency electrician in Richmond page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency electrician in Richmond. Related guides: Commercial electrical inspection Melbourne - compliance, test and tag, switchboard audits, 6 signs your home is overdue for an electrical safety check.