Melbourne home lights dipping as a split-system air conditioner compressor starts
Electrical

Lights dimming when the aircon starts Melbourne: overload or wiring fault?

Kevin · Licensed Electrician 7 min read

Lights dimming when the aircon starts Melbourne: what to check

Infographic: Lights dimming when the aircon starts Melbourne: what to check.

Lights that dip when the air conditioner compressor kicks in are common in Melbourne summers — a brief brown flicker can be start-current on a shared circuit. Lights that stay dim, flicker constantly, or come with buzzing and hot boards are different: that pattern can mean overload, undersized supply or a loose connection that needs a licensed electrician.

Aircon making lights dip badly?

Call 1300 24 11 47 — Melbourne electricians check load, circuits and board capacity before summer peaks.

The short version

  • A very brief dim on compressor start can be normal on older shared circuits.
  • Long dips, repeated flicker, bright/dim swings or appliance resets are not “just summer.”
  • Split systems should usually have appropriately rated dedicated circuits.
  • Whole-home dimming may involve service capacity, loose neutrals or failing connections — urgent if severe.
  • Do not keep adding heaters and kettles to the same struggling board.

Normal dip vs problem dip

PatternLikely OK?Action
Single soft blink <1 second at startOften yes on older installsMonitor; plan circuit check
Lights stay dim while AC runsNoElectrician — voltage drop / overload
Flicker every time any large load startsNoBoard / supply investigation
Electronics reboot when AC startsNoDedicated circuit / capacity upgrade path
Dim + buzz/smell at boardEmergencyIsolate if safe; call now

Why Melbourne homes show this in heatwaves

January–February peak demand coincides with ageing switchboards in Brunswick, Footscray and similar suburbs still feeding modern inverter splits from circuits never designed for continuous compressor loads. Multi-head systems and ducted outdoor units draw serious start and run current. Add induction cooking at dinner and the lights tell the story.

Technical causes in plain language

  • Shared circuit: AC on the same run as lights or power points.
  • Undersized cable / long run: voltage drop to outdoor unit.
  • Weak connections: heat and flicker under load.
  • Board at capacity: diversity assumptions broken by modern loads.
  • Supply side issues: less common but possible — electrician helps identify boundary.

See also dedicated circuits for high-power appliances and home load calculation.

⚠ Dangerous voltage symptoms

If some lights go very bright while others dim, or you smell burning under load, treat it as urgent. Loose neutrals can destroy appliances and create shock/fire risk.

What we do on a dimming complaint

  1. Ask which lights dim, whether whole house or one area, and AC type.
  2. Inspect switchboard loading and protection devices.
  3. Check whether the AC has a correct dedicated circuit and isolator.
  4. Measure voltage behaviour under start where safe and appropriate.
  5. Quote remediation: circuit separation, cable upgrades, board upgrades, or further network escalation if indicated.

HVAC note

Failing compressors or incorrect electrical installation can worsen electrical symptoms. Sometimes you need both an electrician and an ARC-licensed HVAC tech. We triage so you are not paying two full emergency call-outs blindly — describe brand, age and whether cooling still works.

Multi-split and ducted systems: bigger electrical footprints

Multi-head splits and ducted outdoor units draw more complex loads than a single small wall head. If your lights dip when zone two starts or when the ducted unit leaves fan-only mode, the electrical design may never have matched the HVAC sales pitch. Coordinate electrician and HVAC tech rather than blaming “the globes.” Isolators, circuit ratings and cable sizes must match nameplate data.

Retrofits onto 2.5 mm² shared circuits in older homes are a frequent root cause. Correct dedicated circuits are not optional extras.

What to log before the visit

  • Which lights dim — whole house or one area?
  • Does the dim happen only on compressor start or also while running?
  • Do other large loads (oven, kettle, EVSE) create similar dips?
  • Any burning smell, buzz or warm board during the dip?
  • Age of switchboard and whether ceramic fuses remain?

That log prevents wasted diagnostic time and supports insurance or warranty discussions if equipment was recently installed.

Summer peak planning

Fix dimming issues before the first heatwave weekend, when electrician queues stretch and HVAC failures cascade. Capacity upgrades and circuit separation are quieter jobs in shoulder seasons. If you are also planning solar or batteries, tell us — voltage behaviour and board layout interact.

LED drivers, flicker perception and real voltage drop

Modern LED lamps react visibly to brief voltage dips that older incandescent bulbs masked. That does not make the dip imaginary — it makes it more noticeable. We still measure and assess whether the circuit and supply path are adequate for the compressor start characteristics of your system.

If dimming happens house-wide when the outdoor unit starts, suspect service, main connections or board-level issues. If only the living-room lights on the same circuit as a wall split dim, suspect shared circuit design. Those two patterns lead to different quotes.

During heatwaves, multiple neighbours starting aircon can also affect street voltage. We help identify whether your installation is the weak link or whether a network conversation is warranted — without sending you in circles between trades.

Do not “solve” dimming by fitting random boosters or DIY capacitor kits. Correct cable sizing, dedicated circuits and sound terminations are the professional path.

EV chargers, induction cooktops and stacked evening loads

The aircon start dip that was “always a bit noticeable” becomes a brown-out when you also run an induction cooktop and a Mode 3 EV charger on an ageing single-phase board. Load diversity assumptions from 1995 do not survive 2026 appliance stacks. A dimming complaint is often the first polite warning before nuisance trips and hot boards.

We can stage upgrades: dedicated AC circuit first, board capacity next, EVSE last — or a combined design if you want one isolation window. Bring appliance nameplates or model lists to the quote visit. Guessing current draw from marketing brochures wastes everyone’s time.

If dimming began immediately after a new HVAC install, involve both the HVAC contractor and an electrician early. Electrical supply adequacy is part of a proper install, not an optional extra after the outdoor unit is already bolted down.

One-line rule

Brief blink once: monitor and book. Long dim, whole-house dip, or heat/smell: call now on 1300 24 11 47.

FAQ

Will LED lights show dips more than old halogens?
LEDs can make brief dips more noticeable. That does not mean the underlying voltage drop is imaginary.
Can a soft-start or inverter AC fix this?
Inverter systems often start softer than old fixed-speed units, but wrong circuit design still causes problems. Do not assume a new head unit fixes board capacity.
Is this an emergency tonight?
If dimming is mild and brief with no heat/smell, schedule soon. If severe, continuous, or paired with board warnings, call urgently.
Could solar be involved?
Export/import transitions and inverter issues can interact with household voltage perception — mention solar on the call.
Do I need three-phase?
Some large homes and big ducted systems benefit from three-phase upgrades; many splits are fine on correctly designed single-phase circuits. Assessment first.

Explore our Melbourne electrical services or see what is included in electrical fault finding and repairs. For more practical detail, read Hot or Buzzing Switchboard Melbourne: Heat, Noise & Fire Warning Signs and Water in Switchboard Melbourne: Storm Damage Response & Safe Isolation.

Fix the circuit before another heatwave weekend

Call 1300 24 11 47 — we separate “normal blink” from dangerous voltage drop across Melbourne.

Need a Melbourne electrical technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.