Mould inside an air conditioner is more than a cosmetic problem — it circulates fungal spores through every room the system serves. Melbourne's humid autumn and spring conditions make mould growth in AC units especially common. Here's how to identify it, what the health risks are, and what to do about it.
Where mould grows in an air conditioner
Evaporator coil and drain pan
The evaporator coil is perpetually wet when the system is running in cooling mode — this is where refrigerant absorbs heat from the air, causing condensation. The drain pan below collects this moisture. If the drain becomes blocked or the pan is not fully draining, standing water provides a perfect mould growth environment.
Filters
Blocked or infrequently cleaned filters accumulate dust and organic particles. When the filter becomes damp (from the coil area), mould colonises quickly. This is the most common location for mould in split systems.
Ductwork (ducted systems)
In ducted systems, mould in ducts is more serious — fibreglass duct lining in older Melbourne homes absorbs moisture and is particularly susceptible. Mould here is difficult to access and often requires professional duct cleaning or duct replacement.
Fan blades and blower wheel
The blower wheel (in ducted systems) and fan blades (in split systems) accumulate debris. When wet, biofilm and mould grow on fan surfaces and are blown into the airstream.
Signs of mould in your air conditioner
- Musty or "wet" smell when the system starts, which may fade after a few minutes
- Visible black, grey, or green spots on the air outlet grille or around the indoor unit
- Increased allergy symptoms (runny nose, irritated eyes, coughing) when the AC is running
- Visible moisture or staining around vents in ducted systems
Health risks
Mould spores circulated through an HVAC system affect the whole home. The most common health effects:
- Respiratory irritation — particularly for asthma and hayfever sufferers
- Mycotoxin exposure (from certain mould species like Stachybotrys) in serious infestations
- Hypersensitivity pneumonitis in rare prolonged exposures
For most households with mild mould contamination, proper cleaning resolves health symptoms. For immunocompromised individuals, early remediation is more important.
DIY cleaning vs professional service
| Mould location | DIY possible? | Recommended approach |
|---|---|---|
| Filters (split system) | Yes | Wash with warm soapy water; let dry fully before reinstalling |
| Outlet grille and louvres | Yes | Wipe with diluted white vinegar or antifungal cleaner |
| Evaporator coil | Limited | DIY coil spray products available; professional service recommended for heavy mould |
| Drain pan and drain line | Yes (with care) | Flush drain with diluted bleach; call professional if blocked |
| Ductwork (ducted systems) | No | Professional duct cleaning required — AIRAH-standard cleaning |
| Blower wheel | No | Requires unit disassembly — professional service only |
How to prevent mould returning
- Run fan-only mode for fast local response after cooling cycles — this dries out the coil and drain pan before the system shuts down
- Clean filters every 2–4 weeks during heavy use periods (Melbourne summer)
- Ensure drain line is clear and flowing freely — check at start of each season
- Annual professional service — technician cleans coil, pan, and checks drainage
- In ducted systems, consider installing UV-C germicidal lights inside the air handler to inhibit microbial growth
When to replace instead of clean
If mould has penetrated fibreglass duct lining in older Melbourne homes, cleaning is ineffective — the lining must be replaced or the ducts sealed with a mould-resistant liner. Discuss with your HVAC technician during the service visit.
Melbourne homes and mould risk in air conditioners
Why Melbourne’s climate creates mould risk in aircon systems
Melbourne’s combination of warm, humid summers and cool, damp winters creates conditions where condensation inside air conditioner indoor units is common. When a split system or ducted AC runs in cooling mode, the evaporator coil drops to below dewpoint temperature, condensing moisture from the air. This moisture should drain away via the condensate drain. When the drain is blocked or the system is not serviced regularly, standing moisture on the coil and in the drain tray allows mould and bacteria to grow. Melbourne homes that are less well ventilated (common in older terrace houses) have higher baseline indoor humidity, increasing mould risk further.
DIY mould cleaning vs professional service
The indoor unit filter is easily accessible and can be removed, washed in warm soapy water, dried completely, and reinstalled by the homeowner. Beyond the filter, cleaning should be left to a licensed technician. The evaporator coil itself requires chemical coil cleaner and proper containment — coil cleaner is an irritant and must not drip onto electrical components or be inhaled. Professional coil cleaning during a service includes a high-pressure hot water wash of the condenser coil (outdoor unit) as well, which improves heat exchange efficiency and system capacity by 10–20% in a heavily fouled system.
Mould and indoor air quality health impacts
Running an air conditioner with mould on the evaporator coil or in the ductwork distributes mould spores and mycotoxins throughout the home. This is particularly harmful for occupants with asthma, allergies, or compromised immunity. If anyone in your household experiences increased respiratory symptoms when the air conditioner runs, mould in the system is a likely cause. A professional service including coil cleaning and sanitisation typically resolves the problem within one service visit. 24/7 Service Mate’s Andy carries antibacterial coil treatment as standard on all Melbourne HVAC service calls. Call 1300 24 11 47.
How to prevent mould returning in your Melbourne air conditioner
After a professional clean, these habits reduce mould recurrence in Melbourne’s climate:
- Run the AC on fan-only mode for 15–20 minutes at the end of each cooling session — this dries the evaporator coil and removes residual moisture before the unit shuts down
- Clean the indoor unit filter every 4–6 weeks during active use seasons (Melbourne summer and winter)
- Do not block the indoor unit’s return air grille with furniture or curtains — restricted airflow increases coil condensation
- Book a professional service every 12 months to inspect the drain and coil before heavy use season
- If you notice a musty smell when the AC starts up, do not delay — a brief musty smell that clears quickly is surface mould; a persistent smell indicates established mould requiring professional cleaning
24/7 Service Mate’s HVAC service includes a post-clean fan-dry cycle and antibacterial treatment as standard. Call 1300 24 11 47.
If your air conditioner is a ducted system and mould has spread into the ductwork, a duct cleaning is recommended in addition to the unit service. Ducted mould remediation is a more involved process and cost depends on duct size and length. 24/7 Service Mate can inspect your ducted system and provide a duct cleaning quote if required. Do not run a mould-contaminated ducted system as it distributes spores through every room the ductwork serves.
Clean air conditioner filters and coils also improve energy efficiency by up to 15 percent, reducing your electricity bills as well as indoor air quality issues.
Annual aircon servicing is the most effective mould prevention strategy for Melbourne homes.
FAQ
- Is mould in air conditioners common in Melbourne?
- Yes, particularly in split systems in Melbourne's older apartments and terrace houses. Melbourne's spring and autumn humidity creates ideal conditions for mould growth in HVAC systems that aren't regularly serviced. Annual servicing significantly reduces the incidence.
- Can I use bleach to clean my air conditioner?
- Diluted bleach (1:10) can be used on non-metallic surfaces like drain pans and grilles. Do not spray bleach directly onto evaporator coils — it can corrode aluminium fins and copper tubing. Use purpose-made HVAC coil cleaners or have a technician perform the coil clean.
Air conditioner mould service Melbourne
Professional split system and ducted AC cleaning including mould treatment. Call 1300 24 11 47.
Related reading
For local help, see our Melbourne HVAC services, HVAC technician in Richmond, HVAC technician in St Kilda. Our air conditioning repair page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency HVAC repair in Richmond. Related guides: Air Conditioner Service Cost Melbourne 2026, Ducted air conditioning installation cost Melbourne - full breakdown by home size.