It feels strange, but it is common: the lights are on while every power point in the room is dead. In most Melbourne homes, lighting and power are separate circuits.
Need a room circuit diagnosed?
Call 1300 24 11 47. Tell us whether there is heat, smell, water or repeated tripping.
The short version
- Power outlets and lights are commonly protected by separate circuits.
- Unplug all affected appliances and reset a clearly tripped breaker once only.
- If it trips again, stays off, or there is heat, burning smell or water, leave it isolated.
- One faulty outlet can interrupt downstream outlets on the same circuit.
- A licensed electrician can test the circuit without opening live fittings or guessing.
Why lights can stay on
Lighting circuits and socket outlet circuits are usually separate. That means a power circuit can trip or fail while the ceiling lights continue operating from a different breaker or RCBO.
Common causes
- A tripped breaker protecting that room's power circuit.
- A faulty appliance plugged into the room.
- A damaged or loose power point connection.
- A cable fault between outlets.
- Moisture in an external outlet connected to the same circuit.
Safe checks
Unplug everything in the room, check the switchboard from outside the cover, and reset once only if a breaker is clearly off. If it trips again, leave it off. Do not remove outlet plates or switchboard covers.
When it is urgent
Call urgently if the outage includes burning smell, buzzing, warmth, scorch marks, water exposure, or repeated tripping. Partial power loss can also be urgent if it affects medical equipment, refrigeration or business trading.
What an electrician does
The electrician confirms which circuit is affected, tests the outlets in sequence, checks the switchboard device, and isolates the fault. If a hidden cable fault is suspected, insulation resistance testing helps separate damaged wiring from a failed accessory.
Compliance reminder
Use a licensed electrician for fixed wiring repairs. The Victorian Building Authority and Energy Safe Victoria provide licence and safety information for regulated trades.
Why lights and power are split
Lighting circuits are often separate from power circuits in Australian wiring. Losing power points while lights work usually means one RCD or breaker — not total supply failure.
Work through the pattern safely
Check whether every outlet in the room is out, whether an adjoining room is affected, and whether lights are normal. Unplug chargers, heaters, appliances and powerboards from the dead outlets. At the switchboard, look only from outside the closed cover for a device that is clearly off or in a tripped position. Reset it once. If the circuit holds, reconnect one low-load item at a time. If it trips again, stop: the appliance or fixed circuit needs professional testing.
Do not use a multimeter in the socket, remove outlet plates or bridge power from another room with a permanent extension lead. A temporary extension for a low-load device may be acceptable while waiting, but heaters, kitchen appliances and high-load equipment need their normal circuit.
Common fault locations
In a looped outlet circuit, electricity passes through connections at several points. A loose or heat-damaged connection at one outlet can affect outlets after it, even though the first point still appears normal. Outdoor outlets can also introduce moisture after rain, and a garage, laundry or external fitting may share the same protective device as the room that has lost power. Older Melbourne properties sometimes have altered wiring or circuits that do not follow obvious room boundaries, so testing is safer than assumptions.
What the electrician tests
The electrician confirms the affected protective device, checks the supply at accessible points, tests outlets in a logical sequence and assesses the condition of the circuit. Insulation-resistance and continuity testing help distinguish a cable fault from an accessory or appliance fault. If the problem is overload, we explain whether changing appliance use, adding outlets or installing a dedicated circuit is the durable solution. If wiring is repaired or altered, the applicable Victorian compliance documentation, including a CoES where required, is provided.
When the fault is urgent
Arrange urgent attendance for a hot outlet, crackling, burning smell, scorch marks, water near electrical fittings, visible damage or a breaker that immediately trips. Partial power loss is also time-critical where it affects medical equipment, refrigeration for essential stock or business safety systems. For fire, smoke or immediate danger, leave the area and call 000.
FAQ
- Why are only the power points off?
- Lighting and outlet circuits are usually separate, so one protective device can operate while lighting remains supplied.
- Can a single faulty appliance cause the whole room to lose power?
- Yes. An appliance fault can trip the circuit or safety switch. Unplug everything before one reset attempt.
- Should I keep resetting the breaker?
- No. One reset after removing loads is enough. Repeated trips need diagnosis.
- Can I replace a loose power point myself?
- No. Fixed wiring repairs are licensed electrical work in Victoria.
- Will the electrician need to cut walls open?
- Often faults are found at accessible outlets or the switchboard. If hidden wiring work is needed, the electrician explains the options first.
Keep a small outage from becoming a bigger one
A room with working lights and dead outlets is usually solvable, but it is still a signal to check the circuit properly. Safe isolation and targeted testing are faster than living on extension leads or repeatedly resetting protection.
FAQ
- Can one bad outlet kill others?
- Yes. Outlets can be looped through a circuit, so a fault at one point can affect downstream outlets.
- Should I run extension leads from another room?
- Only as a short temporary measure for low loads. Do not run heaters or high-load appliances this way.
Related reading
For local help, see our Melbourne electrical services, electrician in Richmond, electrician in Melbourne CBD. Our emergency electrician in Richmond page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency electrician in Richmond. Related guides: Dedicated circuits for high-power appliances: ovens, spas, EVs and workshops, Flickering lights Melbourne - 5 causes and when to call an electrician.