Melbourne switchboard showing RCBO and MCB protection devices
Electrical

RCD vs RCBO vs MCB: which protects your Melbourne home (and which you actually need)

Kevin · Licensed Electrician 7 min read

MCB, RCD and RCBO — what each protects

Comparison of overload protection, shock protection and combined RCBO device.
MCBs trip on cable overload and short circuits — they protect wiring, not people from shock. RCDs detect earth leakage in milliseconds to prevent electrocution. RCBOs combine both on a single circuit — the modern best practice for Victorian homes where every final sub-circuit needs RCD protection. Related: Switchboard upgrades

Bringing a board up to modern protection

Flow from assessment through RCD or RCBO install, test and certificate.
We map existing MCBs, identify which circuits lack RCD coverage, then install either a 2-pole RCD feeding MCB banks or RCBOs per circuit — RCBOs cost more upfront but isolate faults to a single circuit. Testing and certification confirm compliance before power is restored.

MCBs protect wires from overload. RCDs protect people from electric shock. RCBOs do both - one device per circuit. In Victorian homes, every final sub-circuit must have RCD protection (achieved with either a 2-pole RCD covering a bank of MCBs, or an RCBO on each circuit). RCBOs are now the modern best-practice install.

MCB explained - what it does and doesn't protect

MCB = Miniature Circuit Breaker. Replaces the old ceramic fuse. Job: trip when current exceeds the rated amount (16A, 20A, 32A) - protecting the wires from overheating and starting a fire. An MCB does NOT trip when a person touches a live wire and current flows to earth through them. A person can be electrocuted on an MCB-only circuit.

RCD explained - earth leakage, who it protects (people)

RCD = Residual Current Device. Also called a safety switch or ELCB. Job: detect imbalance between active and neutral current. If 30mA more flows out than back, current is leaking to earth (through a person or through wet insulation). RCD trips in under 40 milliseconds. This is the device that saves lives.

RCDs DON'T protect against overload - they assume the MCB or fuse upstream does that.

RCBO explained - combined protection, best of both

RCBO = Residual Current Breaker with Overcurrent. Combines MCB and RCD in one module. Each circuit has its own RCBO. Advantage: if one circuit faults, only that circuit trips - not the whole bank of circuits that share a 2-pole RCD.

Disadvantage: more expensive (around $90-$140 per RCBO vs $35-$55 per MCB plus $90-$160 per shared RCD). For an 8-circuit home, RCBOs add about $400-$600 to a switchboard upgrade.

The Australian standard - what's legally required

AS/NZS 3000:2018 (the Wiring Rules) requires RCD protection on all final sub-circuits in domestic installations - power, lighting, hot water, AC, EV chargers. Two methods are accepted:

  • 2-pole RCD upstream covering multiple MCBs (groups of circuits share one RCD)
  • Individual RCBO per circuit

For older switchboards that don't have RCD protection on lighting and oven/cooktop circuits, upgrade is required at the time of significant electrical works (per ESV inspection rules).

Comparison table

DeviceProtects againstProtectsTypical costUsed for
MCBOverload, short circuitWiring/equipment$35-$55Final sub-circuit
RCD (Type AC)Earth leakagePeople$90-$160Group protection (older homes)
RCD (Type A)Earth leakage incl. DC componentPeople$140-$220EV chargers, inverters
RCBO (Type A)All three (overload + earth leakage)People + wiring$90-$140Modern best-practice
RCD socket outletEarth leakage at point of usePeople at that outlet only$120-$220Bathrooms, outdoor

When you need to upgrade your protection

  • Your switchboard has ceramic fuses or no safety switches
  • RCD covers only some circuits (typical pre-2010 home)
  • You're installing an EV charger, solar, or major appliance
  • Renovation or extension triggers an ESV inspection
  • Selling or letting the property (rental compliance)
  • Insurance assessment after a claim

How 24/7 Service Mate assesses your switchboard

Free on-site switchboard assessment with quote. We inspect: age of board, all circuit identification, presence of RCD on each circuit, condition of busbars and main switch, available space for upgrades, neutral and earth bonds, sub-board feeds if any. Quote spells out what's compliant, what's nice-to-have and what's legally required at next inspection.

For most older Melbourne homes - 2-pole RCD covering MCBs is the budget option ($1,800-$2,800). Full RCBO board is best practice ($2,800-$3,800).

FAQ

Is a Type A RCBO worth the extra over Type AC?
For circuits feeding inverters, EV chargers and modern electronics - yes. Type AC may not detect DC residual currents from those devices.
Why does my RCD trip when it rains?
Water ingress into outdoor outlets or a damaged underground cable causing earth leakage. Investigate immediately.
Can I have RCBOs for some circuits and grouped RCD for others?
Yes - and very common in real installs. Most sensitive circuits (kitchens, bathrooms, outdoor power) get RCBOs; lighting circuits may share an RCD.
Are RCBOs reliable?
Tested monthly by pressing the test button. If they fail to trip on test - replace.
What about surge protection?
Surge Protection Devices (SPDs) are separate. Recommended at main switchboard level - protects all RCBOs and downstream gear from lightning and grid surges.

For local help, see our Melbourne electrical services, electrician in Hawthorn and electrician in Essendon. Our switchboard and safety switch upgrades page covers full-board RCBO retrofits. For compliance context, read smoke alarm laws Victoria 2026, circuit breaker keeps tripping, faulty breaker fire-risk signs, and whole-home surge protection.

Switchboard assessment?

Call 1300 24 11 47. Free on-site inspection. Upgrade options costed honestly.

Need a Melbourne electrical technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.