For 1-3 bedrooms, splits usually win on price and replaceability. For 4+ bedrooms, ducted wins on whole-home comfort and operating efficiency at scale. The exact tipping point depends on how many rooms you actually use at once, your switchboard capacity, and whether you want one wall unit per room or none.
Quick decision matrix
| Your home | Recommendation |
|---|---|
| 1-2 bed apartment, 1 living area | Single 5-7kW split |
| 2-3 bed unit, separate living areas | Multi-head split or 2 separate splits |
| 3 bed home, open plan + bedrooms | Either - splits cheaper, ducted cleaner aesthetic |
| 4+ bed home single storey | Ducted with zoning |
| 4+ bed double storey | Ducted with 6-8 zones |
| Heritage home with no roof space | Splits or floor-mount cassettes (no ducted option) |
| Rental property | Split per main living area + bedroom |
What split systems are best at
- Lower upfront cost. A 7kW split installed is $2,500-$3,800 vs $12,000+ for ducted.
- Room independence. One room runs - others stay off. No "zone idle losses."
- Apartment-friendly. No need for roof space access.
- Rental property maintenance. One unit fails - replace one unit, not the whole system.
- Heritage home compatibility. Works where ducted physically can't.
- Faster install. 1 day per unit vs 2-4 days for ducted.
What ducted does better
- Whole-home comfort. One temperature setting covers everything.
- Aesthetics. No wall units. Just ceiling grilles or floor diffusers.
- Efficiency at scale. One large inverter at 70% load beats five splits at 30%.
- Smart zoning. Modern systems target individual room temps.
- Property value. Real estate agents quote ducted as a $20-40k value uplift on family homes.
- Quiet operation. Single outdoor unit, distant from bedrooms.
Cost comparison (Melbourne 2026)
| Scenario | Splits | Ducted |
|---|---|---|
| 2-bed apartment, 1 unit | $2,500-$3,800 | $9,500-$13,500 |
| 3-bed home, 2-3 units | $5,500-$10,500 | $11,500-$16,500 |
| 4-bed home, 4-5 units | $11,000-$18,500 | $14,000-$19,500 |
| 5-bed home, 5-6 units | $14,000-$22,500 | $17,000-$25,000 |
| 5-year running cost, 4-bed | $5,500-$8,000 | $5,000-$7,500 |
| 10-year replacement (any units) | Per unit $2,500-$3,800 | Full system $14k+ |
Note: ducted has higher upfront but similar/lower running. Splits have lower upfront but each unit is its own replacement risk over 10-15 years.
Melbourne climate factor - heating AND cooling efficiency
Melbourne climate matters more than people realise. Reverse-cycle splits and ducted both heat and cool. Heating COP in Melbourne winter (5-12°C ambient) typically lands between 3.5-4.5 - meaning every $1 of electricity delivers $3.50-$4.50 of heat. Gas ducted heat (which many Melbourne homes still have) gives back about 80-90% of the gas energy as heat - so reverse-cycle wins on efficiency in 2026 tariffs.
For pure cooling in 35°C+ heat, both perform well. The difference shows up over years of use: ducted at part-load with zones runs efficiently; multiple splits running simultaneously at full load consume more.
Noise, aesthetics, and rental suitability
- Split system noise: Indoor unit 20-35 dB, outdoor unit 45-55 dB. Multiple outdoor units = multiple sources.
- Ducted noise: Indoor unit hidden in roof space, ceiling diffuser 22-28 dB. Single outdoor unit, can be sited away from bedrooms.
- Aesthetics: Splits = visible wall unit per room. Ducted = ceiling grilles only.
- Rental: Splits give tenants control room-by-room. Ducted needs a tenant to understand zoning. Most rentals get splits for this reason.
The hybrid option (multi-head split)
One outdoor unit runs 2-5 indoor heads. Mid-priced ($4,500-$9,500 for 3-4 heads), neat compromise for homes with 3 separate living areas where ducted can't be installed. Trade-offs: if the outdoor unit fails, all heads stop. Pipework runs can be complex. Some multi-heads can't run simultaneously in heating AND cooling.
How to choose for your Melbourne home
Walk through these in order:
- Is there roof space? If no, splits or floor-mount only.
- How many rooms used at the same time? <2 = splits win. >3 = ducted wins.
- Aesthetic priority for wall-mounted? If yes - ducted.
- Is the switchboard upgraded? Both need adequate capacity; ducted often needs three-phase for >18kW.
- Plan to stay 10+ years? Ducted amortises better. <5 years? Splits, easier to replace.
Melbourne climate and your system choice
Why Melbourne’s four-seasons-in-one-day reputation matters for HVAC
Melbourne’s climate is notoriously variable — 38°C in January, 6°C in July, with southerly busters dropping temperature 15°C in an hour. This means any air conditioning system in Melbourne must perform reliably in both heating and cooling modes. Both split systems and ducted reverse-cycle handle this well. However, ducted gas heating combined with a split system for cooling is a hybrid approach popular in older Melbourne homes — you get the efficiency of gas heat and the cooling precision of inverter AC, but at the cost of two separate systems to maintain.
Energy efficiency comparison in Melbourne conditions
Modern inverter split systems (Daikin, Mitsubishi, Fujitsu) typically achieve a COP (coefficient of performance) of 4–6 in heating mode — meaning 4–6 units of heat output per unit of electricity consumed. This makes reverse-cycle heating significantly cheaper per unit of warmth than gas in most Melbourne households, particularly since gas network tariffs increased in 2023–2024. Ducted reverse-cycle achieves similar efficiency. The efficiency penalty with ducted systems is duct leakage — old or poorly installed ducts can waste 20–30% of conditioned air before it reaches the room. A duct integrity test during installation is worth requesting.
Rental property considerations in Melbourne
For Melbourne landlords and property investors, split systems are the dominant choice for rental properties because: installation is less disruptive, individual units can be replaced without a whole-system upgrade, and tenants expect split systems in medium-density apartments. Ducted is more common in owner-occupied homes and premium rentals above $600/week where whole-house climate control is a selling point. Energy Safe Victoria and Consumer Affairs Victoria both note that air conditioning (either type) is now considered a reasonable expectation in Melbourne rental properties given summer temperatures.
FAQ
- Can I have both?
- Yes - ducted for main areas plus a split for a specific space (gym, garage office) is common.
- Do splits work in heritage homes?
- Yes - and often the only option where ducted can't fit.
- Are smart-zoned ducted systems worth the extra?
- For 4+ bed homes, usually yes - the run-only-what-you-use savings recover the controller cost in 3-5 years.
- What about evaporative cooling?
- Cheaper to run in dry conditions, but doesn't cool well on humid days and doesn't heat. Mostly a Western/Northern suburb choice in older homes.
- How long do each last?
- Splits: 10-15 years. Ducted: 15-20 years.
Related reading
For local help, see our Melbourne HVAC services, HVAC in Camberwell and HVAC in Doncaster. Our ducted air conditioning page covers brand options. For ducted pricing in detail, read ducted aircon installation cost Melbourne.
Want both options costed?
Call 1300 24 11 47. We quote both splits and ducted side-by-side so you can compare honestly.