Ducted reverse-cycle air conditioning indoor unit and ducting being installed in a Melbourne home
Heating & Cooling

Ducted air conditioning cost Melbourne 2026: install ranges, zoning and what quotes hide

Andy · HVAC Technician 12 min read

Ducted air conditioning cost Melbourne: the short version

Infographic summarising the key points of Ducted air conditioning cost Melbourne 2026: install ranges, zoning and what quotes hide.

Ducted air conditioning cost Melbourne: repair or upgrade?

Infographic: Ducted air conditioning cost Melbourne: repair or upgrade?
Compare the immediate repair path with the longer-term upgrade path before approving work.

Ducted reverse-cycle air conditioning in Melbourne typically costs $8,000–$18,000+ fully installed for many suburban homes in 2026, with large multi-zone or difficult roof-space jobs climbing higher. The spread comes from capacity, brand, number of zones, duct design, electrical supply and how much of the old system can be reused. This guide breaks down realistic price bands, what a proper quote must show, and when split systems or a hybrid approach beat whole-home ducted.

Want a ducted cooling quote?

Call 1300 24 11 47 — we assess roof space, zoning and electrical capacity before putting a written figure on paper.

The short version

  • Many Melbourne ducted reverse-cycle installs land around $8,000–$18,000+ depending on size and zones.
  • Large homes, premium brands, complex zoning and electrical upgrades push past $20,000.
  • Reuse of old ducting can cut cost — or lock in airflow problems if the duct design was wrong.
  • A fair quote separates equipment, duct labour, electrical, zoning controls and commissioning.
  • Split systems still win for apartments and room-by-room budgets; ducted wins for whole-home comfort when the roof allows.

What “ducted air conditioning” means in Melbourne homes

Most new ducted installs here are reverse-cycle: one outdoor unit, one indoor fan coil (usually in the roof), and a network of ducts to ceiling outlets, often with motorised zone dampers. Older homes may still have gas ducted heating with add-on refrigerated cooling — a different architecture with its own service and replacement logic.

Roof space quality decides half the job. Low pitches, tight trusses, asbestos-era dust, and long runs across renovated floorplans all add labour. Inner-suburban homes in Hawthorn, Kew, Malvern, Brighton and similar often need careful outdoor unit siting for noise and neighbours. Newer estates in the west and north may have easier access but larger floorplates that need honest capacity calculations — not a one-size outdoor unit forced onto every four-bedroom plan.

Explore service options on our heating and cooling hub. For split-versus-ducted decision framing, see split system vs ducted Melbourne.

Ducted reverse-cycle cost ranges 2026

Home / scope Typical installed guide What usually sits in the range
Small home / townhouse, 2–3 zones$8,000–$12,000Modest capacity, simpler duct layout
Typical 3–4 bed suburban home, 3–5 zones$11,000–$16,000Common Melbourne mid-market installs
Larger home, premium brand, 5–8 zones$15,000–$22,000+More outlets, longer runs, higher kW
Replace indoor/outdoor only (ducts reused)$6,000–$12,000Only if existing ducts are sound and sized right
Electrical upgrade contribution (if required)$800–$4,500+New circuit through to full board upgrade
Gas ducted heater replacement (heating-only plant)Wide — quote specificDifferent job; do not mix price bands casually

Prices assume legal refrigerant handling, commissioning, basic zoning controls and standard ceiling outlets. Decorative grilles, wifi premium controllers, bulkheads, crane lifts for outdoor units, and major plaster repairs after grille relocation are extras when disclosed properly.

Capacity and design — where cheap quotes go wrong

Undersized plant runs flat out on hot north-wind days and still feels weak. Oversized plant short-cycles, dehumidifies poorly and wears components. Rules of thumb exist, but a proper assessment looks at floor area, insulation, glazing, orientation and how you live in the home. Open-plan kitchen-living with west glass is not the same load as a cellular bedroom wing.

Duct design matters as much as brand stickers. Crushed flexible duct, excessive bends, undersized returns and leaky joints create “the unit is fine but the rooms are not” complaints. Reusing old ducting only saves money if the layout still matches the new system’s airflow. Andy would rather tell you to replace two trunk runs than inherit a silent airflow defect.

Zoning: comfort feature or cost inflator?

Zones let you condition living areas by day and bedrooms by night, which cuts running cost when used properly. Each additional motorised damper and controller hardware adds capital cost. Poorly commissioned zones fight each other — one room freezing while another starves for air.

Ask the quote to list: number of zones, damper brand/type, thermostat or controller model, and whether static pressure and airflow are commissioned after install. “Fully zoned” without a zone map is marketing language, not engineering.

Electrical and structural dependencies

Ducted reverse-cycle outdoor units need appropriate electrical supply and isolation. Older Melbourne fuse boards may need upgrades before a large outdoor unit can be connected legally and safely. That work is licensed electrical — coordinate it, do not treat it as an optional afterthought. See our switchboard upgrade complete guide if your board is still ceramic fuses or light on RCD protection.

Outdoor unit pads, wall brackets, roof platforms and vibration isolation affect noise complaints. A cheaper wall bracket in the wrong place can cost you more in neighbour disputes than a correctly sited pad.

Running costs in Melbourne’s climate

Reverse-cycle ducted systems are generally efficient heating and cooling compared with old resistive electric heating, but bills still reflect setpoints, zoning discipline, insulation and electricity tariffs. Setting the whole house to 18°C cooling with every zone open on a 40°C day will hurt regardless of brand.

Maintenance — filter cleans, outdoor coil condition, condensate drains, and periodic professional service — protects efficiency. Skipped filters are the most common “my ducted system suddenly feels weak” call we get in December.

Repair, replace or hybrid?

If an existing ducted system has a failed compressor but sound ducts and a recent indoor unit, repair or outdoor swap may win. If ducts are asbestos-contaminated dust traps, crushed, or sized for a different era of plant, full redesign may be smarter. Some homes do best with ducted living zones plus a bedroom split — especially multi-storey layouts where roof runs are painful.

Emergency no-cool nights are for diagnosis and make-safe, not for locking a $18,000 redesign without a written plan. See emergency aircon repair costs for after-hours context.

What a fair ducted quote includes

  • Outdoor and indoor model numbers and rated capacity.
  • Zone count and controller specification.
  • Ducting scope: new vs reuse, insulation grade, outlet count.
  • Electrical scope included or excluded.
  • Condensate drainage method.
  • Commissioning and warranty registration responsibilities.
  • Exclusions: plaster repairs, painting, crane, asbestos testing if relevant.

DIY stop rules

  • No DIY refrigerant work.
  • No DIY fixed wiring to outdoor isolators or switchboards.
  • Homeowners can usually clean return filters where the manufacturer provides user access — that is maintenance, not installation.
  • Do not “balance” zones by permanently blocking outlets with cardboard; you can damage the fan coil.

Roof space realities unique to Melbourne housing

Victorian freestanding homes often use timber trusses with limited walk space. Installers may need temporary boards, extra labour for long carries of duct, and careful work around downlights and old wiring. Double-storey homes complicate return air paths and outdoor unit placement — a quiet rear yard pad beats a bedroom-wall bracket every time for neighbour relations.

Heritage overlays and street-facing plant can constrain where the outdoor unit sits. Strata townhouses may require owners-corporation approval for condensers on common walls or roofs. Build approval time into the project plan before you pay a deposit on equipment that cannot be legally sited where the salesperson pointed.

Asbestos-containing materials in older eaves, flues and some duct insulation are a pause-and-test issue. Budget contingency if your home was built or renovated in higher-risk eras. Cutting corners on dust control is not a saving.

Controllers, wifi and “smart” add-ons

Zone controllers range from simple wall thermostats to app-connected systems with geofencing and energy reports. Apps are useful; they do not fix undersized plant or leaky ducts. Price wifi modules and premium controllers as optional lines so you can compare base comfort cost versus gadget cost. Ask who registers the warranty and whether the controller is OEM or third-party.

Return-air grille location matters more than most brochures admit. A return in a hallway that starves bedrooms when doors close will feel like a zoning fault when it is really an airflow design fault. Walk the home with the designer and mark door habits.

Noise, neighbours and EPA expectations

Outdoor unit noise at night is a classic Melbourne dispute — narrow side setbacks in Brunswick and Richmond make it worse. Ask for sound pressure data at a stated distance, not a vague “quiet unit” claim. Anti-vibration mounts, correct clearances and not boxing the unit into a heat-soaked nook all help. A cheaper unit hard against a neighbour’s bedroom window is an expensive social problem.

Maintenance plan after install

Filter cleans on a schedule, outdoor coil rinse where accessible and safe, condensate checks before summer, and a professional service interval appropriate to the brand. Skipping filters is the fastest way to turn a $14,000 install into a weak-airflow complaint by December. Keep the install paperwork and model numbers for warranty claims.

Comparing three quotes without getting lost

Line up model numbers, rated capacity, zone counts, duct new-versus-reuse percentages, electrical inclusions, and commissioning deliverables. The cheapest total that reuses crushed duct and omits electrical may become the expensive complaint. The dearest premium brand with poor outdoor siting may become the neighbour dispute. Score quotes on design quality first, sticker second.

Ask each installer what happens if roof inspection reveals asbestos tape or undocumented old wiring near the fan coil. Contingency language in writing beats surprise variations on day two.

Seasonal timing and lead times

October–December books out for cooling installs across Melbourne. Shoulder seasons often mean better scheduling and more careful commissioning weather. If your old system failed in a January heatwave, expect temporary repair now and full ducted replacement programmed when plant and labour are available — not a fantasy three-day whole-home redesign in the middle of a heat dome.

How 24/7 Service Mate quotes ducted work

We inspect roof space and outdoor siting where possible before firm pricing. We coordinate electrical needs with Kevin’s team when boards or circuits must change. You get model numbers, zone maps and a clear reuse-versus-replace duct recommendation — not a single mysterious round number.

Deposits, variations and payment milestones

Reasonable deposits secure equipment; huge upfront payments before site inspection are a smell test fail. Variations should be written when roof surprises appear. Final payment after commissioning and controller handover is normal. Keep serial numbers photographed on install day for warranty registration.

If a quote is valid for 30 days, ask whether equipment pricing is locked or floating with supplier lists — 2026 supply chains still move.

Insulation and building fabric still matter

No ducted system overcomes empty wall cavities and single glazing on a west facade forever. Pairing a new system with bulk insulation top-ups and pelmets can cut running hours. Mention planned window upgrades so capacity is not oversized for a fabric that will improve next year. Design for the home you will have, with a footnote for the home you have today.

Return-air pathways through habitable rooms should not rely on undercutting every door by 20 mm as a silent plan — discuss transfer grilles where bedrooms will be closed at night.

After commissioning — the first fortnight

Run each zone, listen for excessive duct rush, and note rooms that never reach setpoint. Call back early if something feels wrong; airflow balancing is easier while the installer still remembers the job. Log filter sizes so replacements are easy to buy. Register warranties before the deadline on the card.

Teach everyone in the home how zoning is meant to be used — all zones open at maximum cool on day one teaches bad habits and high bills.

Confirm who supplies ceiling roses or feature grilles if you want finishes beyond standard white plastic — decorative outlets change lead times and price.

Ask whether old gas heaters being decommissioned need licensed gas capping in the same project window so you are not left with live unused gas points.

If wildfire smoke weeks are part of your summer reality, ask about filter grades and whether the system can recirculate with limited outdoor air — evaporative cannot match that sealed-home behaviour.

FAQs

How much does ducted air conditioning cost in Melbourne?

Many homes fall between $8,000 and $18,000+ installed for reverse-cycle ducted systems. Larger or premium multi-zone jobs run higher. Electrical upgrades and full duct replacement change the total.

Is ducted cheaper to run than multiple split systems?

It depends on how many rooms you condition and how you zone. Ducted can be efficient for whole-home patterns; splits can win when only one or two rooms need conditioning most of the time.

Can you reuse my old gas heating ducts for reverse-cycle?

Sometimes. Duct condition, insulation, sizing and layout must suit refrigerated airflow. Reuse is a saving only when those checks pass — otherwise it transfers old problems to a new outdoor unit.

How long does installation take?

Many suburban installs take one to several days depending on duct scope, electrical works and weather. Complex roof spaces take longer. Ask for a program on the quote.

Do I need council or strata approval?

Many freestanding installs do not need planning permits, but heritage overlays, visible plant and strata/common property rules can. Confirm before ordering equipment.

What brand should I choose?

Prioritise correct sizing, duct design and local parts support over brochure prestige. Premium Japanese brands are popular for a reason, but a mid-range unit commissioned well beats a premium unit installed poorly.

If you are planning whole-home comfort for a Melbourne roof that can take it, call 1300 24 11 47 for a ducted air conditioning quote that prices capacity, zones and electrical reality — not just a headline package figure.

Explore our Melbourne heating and cooling services or see what is included in ducted air conditioning. For more practical detail, read Ducted Heating Blowing Cold Melbourne: Zoning, Gas & Thermostat Checks and Hydronic vs Ducted Reverse Cycle Melbourne: Comfort, Cost & Running Bills.

Need practical help now?

Planning whole-home comfort without guesswork—ask for a ducted air conditioning quote built for your Melbourne floorplan by calling 1300 24 11 47.

Need a Melbourne heating & cooling technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.