Gas leaks are Melbourne's most serious home emergency. Natural gas (methane) and LPG are both odourless in their pure form — the distinctive "rotten egg" smell is added deliberately by distributors so you can detect a leak. This guide explains what to do in the first five minutes, what not to do, and how gas leak repairs work in Victoria.
âš ï¸ If you smell gas RIGHT NOW:
- Don't turn any switches or lights on or off
- Don't use a phone inside the building
- Leave the building immediately and leave the door open
- Turn off the gas at the meter if it's safe to reach
- Call Gas Emergency: 1800 GAS VIC (1800 427 842) from outside
- Call our emergency line: 1300 24 11 47 once you're clear
Gas leaks are Melbourne's most serious home emergency. Natural gas (methane) and LPG are both odourless in their pure form — the distinctive "rotten egg" smell is added deliberately by distributors so you can detect a leak. This guide explains what to do in the first five minutes, what not to do, and how gas leak repairs work in Victoria.
What gas smells like and how to confirm it
Natural gas in Melbourne's distribution network has mercaptan (ethyl mercaptan) added — a sulphur compound that creates the distinctive "rotten egg" or "dead match" smell. LPG (bottled gas) also has an odorant added. If you smell this inside your home, treat it as a gas leak until confirmed otherwise. Don't try to locate the source — leave immediately.
The first 5 minutes: what to do and what not to do
| DO | DON'T |
|---|---|
| Leave the building immediately | Don't turn any electrical switches on or off |
| Leave doors open as you leave | Don't use a phone, torch, lighter, or any ignition source inside |
| Turn off gas at the meter (if safe) | Don't re-enter to collect belongings |
| Call 1800 GAS VIC from outside | Don't park a vehicle in the driveway near the meter |
| Call us on 1300 24 11 47 | Don't assume the smell will clear on its own |
Where is my gas meter and how do I turn it off?
In most Melbourne homes, the gas meter is located on the external wall near the front of the property — typically beside the electricity meter. The shut-off valve is directly on the meter. To close it, turn the lever or valve handle until it is perpendicular (at 90 degrees) to the gas pipe. In most meters this means turning it a quarter turn.
Older Melbourne homes (pre-1970) may have a gate valve style tap rather than a lever. Turn it fully clockwise to close.
Who to call for a gas emergency in Victoria
| Situation | Who to call | Number |
|---|---|---|
| Active gas leak — any time | Gas Emergency (Multinet Gas / APA Group) | 1800 GAS VIC (1800 427 842) |
| Gas leak inside a building | Victoria Police / Fire Rescue Victoria (if gas is building up) | 000 |
| Leak found and area made safe — repair needed | 24/7 Service Mate licensed gas fitter | 1300 24 11 47 |
Under Victorian law, all gas fitting work — including leak repairs, pipe pressure testing, and re-lighting of gas appliances — must be performed by a licensed gasfitter (Energy Safe Victoria). This includes 247 Service Mate's fully licensed technicians.
Common causes of gas leaks in Melbourne homes
- Flexible hose failure: The flexible connection behind gas appliances (stoves, heaters) degrades over time. This is the most common source of internal gas leaks in Melbourne kitchens.
- Old or corroded fittings: Pre-1980 homes may have galvanised or older steel gas pipe fittings that have corroded or loosened.
- Pipe movement: Soil movement — common in Melbourne's clay-heavy soils — can move external gas pipes enough to cause joint failure.
- DIY work: Illegal or incorrect DIY connection to gas appliances is a significant cause of hidden leaks in Victoria.
What happens when a gas fitter attends a leak repair
- Pressure test the system to confirm location of the leak
- Isolate the section containing the leak
- Repair or replace the affected pipe, fitting, or flexible hose
- Pressure test the repaired section
- Check all appliances for safe re-ignition
- Issue a compliance certificate (required in Victoria for gas work)
Gas safety in Victorian rental properties
Victorian rental providers are required under the Residential Tenancies Act to have gas appliances safety-checked by a licensed gasfitter at least once every two years. If you're a tenant who suspects a gas leak, your landlord must arrange an emergency repair immediately — this qualifies as an urgent repair.
FAQ
- What should I do if the gas smell has gone by the time the gasfitter arrives?
- Don't assume the problem is resolved. The leak may have been temporary — caused by a fitting loosening slightly or a pilot light blowing out and reigniting. A pressure test will confirm whether the system is fully sealed.
- Can I smell gas but my carbon monoxide detector hasn't gone off?
- Yes. Carbon monoxide (CO) detectors detect CO — a byproduct of incomplete combustion. Natural gas itself won't trigger a CO detector. A gas leak and a CO risk are two separate hazards. Treat a gas smell as a gas emergency regardless of whether your CO detector has activated.
Related reading
For local help, see our Melbourne plumbing services, plumber in Richmond, plumber in Brunswick. Our emergency plumbing and gas fitting page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency plumber in Richmond. Related guides: Bathroom Renovation Plumbing Costs Melbourne: What to Budget per Room, Blocked Drain Melbourne: Causes, DIY First Steps and When to Call.