Replacing a hot water system in Melbourne in 2026 costs $1,400-$2,800 for like-for-like electric storage, $1,800-$3,200 for gas storage, $2,200-$3,800 for continuous flow gas, and $3,800-$6,500 for heat pump (before the $1,400 Solar Victoria rebate). The system type and the location of the existing unit drive the spread.
The short version
- Electric storage replacement: $1,400-$2,800 installed.
- Gas storage replacement: $1,800-$3,200 installed.
- Continuous flow gas: $2,200-$3,800 installed.
- Heat pump: $3,800-$6,500 installed, minus $1,400 Solar Vic rebate.
- Add $300-$900 for tight access, balcony installs, or relocations.
Price table by type (Melbourne 2026)
| System type | Unit cost | Install cost | Total range | Rebate (Vic) |
|---|---|---|---|---|
| Electric storage 250-400L | $700-$1,500 | $700-$1,300 | $1,400-$2,800 | Limited |
| Gas storage 135-170L | $900-$1,800 | $900-$1,400 | $1,800-$3,200 | None |
| Continuous flow gas (26L/min) | $1,100-$2,000 | $1,100-$1,800 | $2,200-$3,800 | None |
| Heat pump 270-315L | $2,400-$4,200 | $1,400-$2,300 | $3,800-$6,500 | Up to $1,400 Solar Vic |
| Solar hot water + boost | $3,000-$5,500 | $1,800-$2,800 | $4,800-$8,300 | STCs + Solar Vic |
Installation cost vs unit cost - what the quote should show
A good hot water quote separates the unit price from the install. Install includes: removal and disposal of old unit, mounting and bracketing of new, water connections (cold inlet, hot outlet, expansion control valve, tempering valve), electrical/gas connection, drainage to a legal discharge point, commissioning, and compliance certificate. Watch for quotes that hide install in "supplied and fitted" without a breakdown - it's harder to compare and easier to inflate.
Gas vs electric vs heat pump - running cost comparison (5-year)
| Type | Annual energy cost (4-person home) | 5-year energy |
|---|---|---|
| Electric storage (off-peak tariff) | $700-$900 | $3,500-$4,500 |
| Electric storage (single-rate) | $1,200-$1,500 | $6,000-$7,500 |
| Gas storage | $500-$750 | $2,500-$3,750 |
| Continuous flow gas | $400-$600 | $2,000-$3,000 |
| Heat pump (COP 3-4) | $200-$350 | $1,000-$1,750 |
| Solar hot water + electric boost | $150-$300 | $750-$1,500 |
Energy costs assume Melbourne 2026 tariffs and average 4-person consumption. Heat pump is the cheapest to run in Melbourne climate; solar hot water can beat it on annual cost but with higher capital outlay.
Victorian rebates 2026
Solar Victoria's heat pump and solar hot water rebate covers up to $1,400 off an eligible unit when replacing electric, gas, or LPG storage systems. Eligibility requires income thresholds and household conditions - check Solar Victoria's site for current criteria as policy updates frequently. Federal Small-scale Technology Certificates (STCs) also apply to heat pumps and solar hot water, typically discounted at the point of sale by the installer.
Signs your system needs replacement vs repair
- Rust in the hot water - the tank is corroded internally. Replace.
- System over 12 years old with intermittent issues - replace before it fails.
- Major leak from the cylinder body (not fittings) - replace.
- Pilot won't stay lit and thermocouple replaced multiple times - replace.
- Element failed once, otherwise sound, under 8 years old - repair.
- PTR valve drips - repair (often a $200 fix).
How 24/7 Service Mate handles hot water replacements
Most Melbourne hot water replacements are completed same day. Same-day priority list: emergency-only situations (no water, gas leak, electrical fault). For planned replacement, we book within 48 hours. Quote covers: removal and disposal of old unit, supply and install of new, all connections, compliance certificate, and full commissioning. We also lodge the relevant rebate paperwork on your behalf for heat pump installs.
FAQ
- How long do hot water systems last in Melbourne?
- Electric storage 8-12 years. Gas storage 10-15. Continuous flow gas 12-18. Heat pump 12-15 (compressor warranty often 6 years). Solar hot water 15-20.
- Can I switch from gas to electric heat pump easily?
- Yes - most homes can. You'll need a dedicated 15A or 20A circuit and adequate clearance. Existing gas line can be capped.
- Will I notice a heat pump being slower?
- Heat pumps recover slower than gas continuous flow but a properly sized 270-315L tank is rarely the bottleneck for a 4-person home.
- Is it worth getting a tempering valve?
- It's mandatory for new installations in Victoria to limit bathroom hot water to 50°C. Your installer will fit one.
- Can I install a hot water system myself?
- No. Water and gas connections require a licensed plumber; electrical connections require a licensed electrician. DIY installs void warranty and aren't legal in Victoria.
Related reading
For local help, see our Melbourne plumbing services, plumber in St Kilda and plumber in Footscray. Our hot water system service covers same-day replacement and rebate processing. For the repair-vs-replace decision in detail, read repair vs replace - when your hot water system has reached the end.
Need hot water replaced?
Call 1300 24 11 47. Most Melbourne replacements completed same day, with rebate paperwork lodged on your behalf.