Licensed Melbourne electrician testing wiring during a house rewire assessment
Electrical

House rewiring cost Melbourne 2026: full vs partial rewire and era-by-era pricing

Kevin · Licensed Electrician 10 min read

House rewiring cost Melbourne: your options compared

Infographic: House rewiring cost Melbourne: your options compared.

Full house rewiring in Melbourne typically costs $8,000–$25,000 or more depending on home size, construction type and switchboard scope, while a partial rewire of high-risk circuits runs $2,500–$8,000. Melbourne's housing eras — Federation terraces, post-war bungalows, 1970s brick veneer — each carry different cable types, access challenges and compliance paths that move the price more than square metreage alone.

Planning a rewire or buying an older Melbourne home?

Call 1300 24 11 47 — we test first, quote by zone, and explain partial vs full options before work starts.

The short version

  • Full house rewire (typical 3–4 bedroom Melbourne home): $8,000–$25,000+.
  • Partial rewire (kitchen, bathroom, or high-risk circuits only): $2,500–$8,000.
  • Switchboard upgrade bundled with rewire: often $1,800–$4,500+ — usually essential on pre-1980 homes.
  • Rewiring during renovation (walls open): 20–40% cheaper than closed-wall fishing.
  • Certificate of Electrical Safety and ESV notification are mandatory — must be in the quote.

Melbourne housing eras and what is behind your walls

Rewire pricing starts with era, not postcode. A 1910 terrace in Carlton is a different job to a 1985 double brick in Rowville — even at the same floor area.

Pre-1940: Federation, Edwardian and interwar terraces

Common in inner suburbs — Fitzroy, Collingwood, South Yarra, Williamstown. Wiring may be VIR (vulcanised indian rubber) or early TRS cable, ceramic fuses, shared neutrals, and steel conduit in some rooms. Access is tight: lathe-and-plaster, minimal ceiling space, brick party walls. Full rewires here sit at the upper end of the range and often run 5–10 days.

1945–1965: Post-war bungalows and weatherboard

Heidelberg, Oakleigh, Preston, Footscray. Early TPS (tough plastic sheathed) cable appears but VIR persists in untouched rooms. Timber frame makes fishing cable easier than terrace brick. Partial rewires of kitchens and bathrooms are common when the rest tests acceptably.

1965–1980: Brick veneer and unit blocks

Doncaster, Bundoora, Glenroy, Box Hill. PVC TPS is standard but may be undersized for modern loads — induction cooktops, air conditioning, EV chargers. Switchboards often have fuses or early circuit breakers without RCD protection. Full rewire costs are moderate; switchboard upgrade is frequently bundled.

1980–2000: Late PVC and early renovations

Not always a full rewire candidate — but DIY extensions, unlicensed garage conversions, and bathroom add-ons in Moorabbin, Frankston and Werribee often mean only part of the home is compliant. Targeted partial rewires and board upgrades are typical.

Full rewire vs partial rewire

Full rewire

Every circuit replaced from switchboard to outlet, new fittings where required, new earthing and bonding, RCD protection on all circuits, smoke alarms to current standard, and full certification. Needed when: insulation resistance tests fail on multiple circuits, VIR or TRS is widespread, you are renovating the whole home, or a pre-purchase inspection flagged systemic risk.

Partial rewire

High-risk zones only — kitchen, bathroom, laundry — or circuits that failed testing while others pass. Cheaper upfront but leaves ageing cable in untouched rooms. Acceptable when testing proves remaining circuits have life, you have a plan to address the rest, and you are not about to close walls that will never be opened again.

Partial rewires can become false economy if the untouched wiring fails within five years. Get written test results for circuits that are not being replaced.

House rewiring costs Melbourne 2026

Home type / scope Typical Melbourne range Main cost variable
1–2 bedroom unit (partial — kitchen/bath)$2,500–$5,500Board access, concrete slab penetrations
3 bedroom weatherboard — full rewire$8,000–$14,000Ceiling access, underfloor crawl
3–4 bedroom brick veneer — full rewire$10,000–$18,000Wall fishing, circuit count
2-storey home — full rewire$14,000–$22,000Vertical cable runs, two switchboards
Federation terrace — full rewire$15,000–$25,000+Brick walls, minimal void, heritage access
Switchboard upgrade (with rewire)$1,800–$4,500+Single vs three-phase, meter work
Rewire during open-wall renovation−20–40% on labourBuilder coordination timing
Sub-board to shed/garage (new)$1,200–$3,500Cable run length, trenching

Ranges include labour and standard materials. Asbestos backing boards, distributor meter upgrades, designer fittings, data cabling and after-hours work are additional. See switchboard upgrade costs for board-only pricing.

What affects rewire price

Access and construction

Open walls during renovation are the biggest saver. Closed-wall fishing in double brick costs more per outlet than timber frame with generous ceiling space. Two-storey homes need vertical risers — sometimes chased through masonry.

Circuit count and load design

Modern homes need more circuits: kitchen appliances, laundry, HVAC, EV prep, outdoor power, data. A rewire is an opportunity to right-size circuits — but each additional circuit adds cable, breakers and labour.

Switchboard and earthing

Rewiring without upgrading a fuseboard is rare on pre-1980 homes. New cabling on an old board is a compliance mismatch. Main earth stake upgrade, equipotential bonding in bathrooms, and MEN link work may be required — itemise these in the quote.

Asbestos and hazardous materials

Asbestos switchboard backing in homes built before 1990 is common in Melbourne. Safe removal adds $400–$900+ before any electrical work. Disturbing asbestos lining in eaves or walls triggers licensed removal — not an electrician's scope.

Certification and inspections

All rewiring must be performed by a licensed electrician with a Certificate of Electrical Safety issued and lodged with Energy Safe Victoria. Complex jobs may attract inspection fees. This is not optional and should not be excluded from quotes.

Insurance, sale and renovation triggers

Insurers increasingly ask about wiring age and switchboard type when policies renew on pre-1980 Melbourne homes. A failed insulation resistance test can make cover conditional on rectification. If you are selling in suburbs with heavy investor activity — Brunswick, Footscray, Preston — buyers' building inspectors routinely flag VIR cable and ceramic fuses. A certified rewire or documented partial rewire with test results removes a predictable negotiation lever.

If you are already renovating, sequence matters: rough-in electrical before insulation and plasterboard. Electricians charge significantly less when they can walk the frame freely than when fishing cable through finished walls six months later. Tell your builder the electrical rough-in date is not flexible — it drives everything downstream.

Signs your Melbourne home may need rewiring

  • Insulation resistance tests fail or are borderline on a pre-purchase or safety inspection.
  • VIR or fabric-wrapped cable visible at the board or in ceiling spaces.
  • Frequent tripping that is not explained by appliance load.
  • Buzzing switches, warm power points, or discoloured fittings.
  • Ceramic fuses still in service with no RCD protection.
  • Major renovation planned — walls open is the cheapest time to rewire.

For a deeper condition guide, see rewiring an old Melbourne home and signs your switchboard needs upgrading.

What a fair rewire quote should include

  • Scope: full or partial — with a list of circuits and rooms in each category.
  • Switchboard scope: new board, RCD/RCBO count, sub-boards if any.
  • Smoke alarm strategy: type, locations, interconnection.
  • Test results that justify the scope (for partial rewires).
  • Certification, ESV fees and inspection costs.
  • Variation process for asbestos, concrete surprises, or inaccessible voids.
  • Timeline and power outage expectations — can you stay in the home?

Compare quotes on circuit count and test scope, not lump sum alone. The cheapest full-rewire quote that excludes the switchboard is incomplete.

How 24/7 Service Mate handles rewires

We start with insulation resistance testing and a switchboard audit. You get a report that explains full vs partial options with honest trade-offs. For renovation projects we coordinate with your builder — rough-in before plaster, fit-off after.

We quote by zone where helpful so you can stage work if budget requires — but we are direct when partial scope leaves known risk in untouched circuits. All completed rewires are certified and documented.

See fault finding and electrical repairs, switchboard upgrades, and Melbourne electrical services.

FAQ

How much does it cost to rewire a house in Melbourne?
A typical 3–4 bedroom home full rewire runs $10,000–$18,000 for brick veneer, more for terraces and two-storey builds. Partial rewires start around $2,500–$5,500.
Do I have to move out during a rewire?
Usually not — power is restored to essential circuits each night. Expect 3–7 days without power to sections of the home during a full rewire. Your electrician should provide a daily power plan.
Is a switchboard upgrade enough without rewiring?
Only if cable tests pass. A new board on failing VIR wiring improves switching but not conductor condition. Pre-1980 homes often need both.
Can I rewire one room at a time?
Yes — common for kitchens and bathrooms. Ensure each stage is certified and that you are not leaving known failed circuits untouched without a written risk acknowledgment.
Does rewiring increase property value in Melbourne?
Yes — buyers and building inspectors flag old wiring. A certified rewire removes a common sale negotiation point and satisfies insurer questions on older properties.

Renovation starting in six weeks? Call 1300 24 11 47 — we align rough-in with your builder so you are not paying to fish cable through finished plaster.

Explore our Melbourne electrical services or see what is included in switchboard and safety switch upgrades. For more practical detail, read Call-Out Fee Melbourne Trades Explained: Electricians, Plumbers & HVAC and Summer Electrical Load Melbourne: Aircons, Boards & Avoiding Nuisance Trips.

Need practical help now?

Ageing wiring is a silent hazard—request a Melbourne rewire assessment and cost range on 1300 24 11 47.

Need a Melbourne electrical technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.