Tap replacement in Melbourne typically costs $180–$350 for a straightforward like-for-like basin or sink swap (labour only), $280–$550 for supply-and-install of a standard mixer, and $350–$800 or more for wall-mounted mixers, benchtop changes or corroded backings that need extra work. Replacement is often smarter than a third repair on the same ageing fixture.
Need a tap replaced, not patched again?
Call 1300 24 11 47 — we confirm fit and quote before the old tap comes off.
The short version
- Like-for-like tap replacement (you supply the tap): $180–$350 labour in Melbourne.
- Supply and install — standard basin or sink mixer: $280–$550.
- Wall-mounted or waterfall mixer: $350–$800+ depending on backing and access.
- Benchtop change (1-tap hole to mixer deck plate): $320–$650.
- Corroded tailpieces or stripped threads: add $80–$250 for remedial work.
Tap replacement vs tap repair
A dripping tap repair is $150–$280 when washers, cartridges or O-rings are the fault. Replacement makes sense when: the body is corroded, threads are stripped, the spout is loose internally, you have repaired the same tap twice, or you are upgrading finish and function during a bathroom refresh.
Melbourne's moderately hard water accelerates wear on cheap mixers — common in rental portfolios across Coburg, Reservoir and Dandenong. Landlords often find replacement cheaper than annual washer callouts across multiple properties.
When a repair is still the right call
Quality cartridge mixers from brands like Dorf, Methven or Grohe often have replaceable cartridges costing $25–$80 retail. If the body is sound and the cartridge is available, a $180–$250 repair extends life another 5–8 years. Your plumber should show you the corrosion at the base before recommending replacement — photos help if you are comparing quotes remotely.
When replacement saves money within 12 months
Two washer-based repairs on a $60 pillar tap in 12 months equals one replacement with new flexis. Add the water waste cost — a slow drip can add $50–$130 per year to Melbourne water bills — and replacement often wins on total cost of ownership, not just the next invoice.
For drip-only faults, see leaking tap repair cost Melbourne before committing to a new fixture.
Common Melbourne tap replacement costs 2026
| Job | Typical Melbourne range | Main cost variable |
|---|---|---|
| Basin pillar tap → new pillar tap (labour only) | $180–$280 | Tailpiece condition |
| Basin mixer supply + install | $280–$550 | Tap quality ($80–$300 retail) |
| Kitchen sink mixer supply + install | $320–$600 | Deck thickness, hole count |
| Wall-mounted bath/shower mixer | $400–$800+ | In-wall body access, tiling |
| Benchtop hole drill + mixer install | $350–$650 | Stone vs laminate, offcut risk |
| Replace seized isolation valves (pair) | +$80–$180 | Access under basin |
| Remove rusted tailpiece / remedial | +$80–$250 | Age, galvanised pipe |
| Multiple taps (bathroom package) | $600–$1,400 | Quantity, shared attendance |
Ranges are guides. Tiling, carpentry and after-hours attendance are additional unless bundled in a renovation quote.
What affects tap replacement price
Tap type and mounting
Deck-mounted mixers on a standard vanity are a 45–90 minute job when isolation valves work. Wall-mounted mixers need in-wall bodies — if the rough-in does not match the new brand, the wall opens. That is plumber plus tiler territory and can exceed the tap price itself.
Hole configuration
Switching from a three-piece tap set to a single mixer usually needs a deck plate or new holes in stone — stone cutting is a specialist line item. Measure hole spacing before buying a mixer online.
Water pressure and tempering
Bathroom mixers on older Melbourne homes may need tempering valves to meet hot water delivery rules — especially in renovations. If the tap replacement is part of a bathroom compliance upgrade, tempering adds $250–$550. See shower and bathroom plumbing.
Supply pipe condition
When the tap comes off, corroded flexis, seized chrome tailpieces and galvanised nipples appear. Budget remedial work on taps that have not been disturbed in 20 years — typical in 1960s brick veneer in Heidelberg and Box Hill.
Licensing
Tap replacement on fixed plumbing is regulated work in Victoria — a licensed plumber is required. See the Victorian Building Authority for registration requirements.
Outdoor and laundry taps
Garden taps and laundry tub cocks live harder lives — UV, hose drag, freezing overnight in the Dandenong Ranges. Replacement often includes cutting a seized fitting or upgrading to a quarter-turn ball valve style. Budget $200–$380 for external taps; more if the wall backing is brick and the penetration needs resealing against Melbourne weather.
What a fair tap replacement quote should include
- Who supplies the tap — and the exact model if plumber-supplied.
- Whether isolation valves and flexi hoses are replaced as standard (they should be).
- Hole configuration compatibility — deck plate or drilling if needed.
- Remedial allowance if tailpieces are seized.
- Whether tiling or stone cutting is excluded.
- Waste disposal of the old tap.
Fixed-price quotes should state what happens if the tap body snaps off in the wall — a real risk on 30-year-old garden taps in coastal suburbs like Altona and Beaumaris.
How 24/7 Service Mate handles tap replacements
We check isolation valves before quoting. If you supply the tap, we confirm compatibility from the model number or a photo. We replace flexis and valves as standard on every swap — not as a surprise line item on the invoice.
If the backing is worse than expected, we stop and quote remedial work before forcing corroded parts. For bathroom packages we batch attendance to reduce per-tap cost.
See leak detection and repair and Melbourne plumbing services.
FAQ
- How much does a plumber charge to replace a tap in Melbourne?
- Labour-only replacement is typically $180–$350. Supply and install of a standard mixer is $280–$550. Wall-mounted and stone bench jobs cost more.
- Is it cheaper to repair or replace a dripping tap?
- First repair is usually cheaper ($150–$280). Third repair on the same tap, or corrosion visible at the base, favours replacement.
- Can I replace a tap myself?
- Fixed plumbing alterations require a licensed plumber in Victoria. DIY tap work on regulated systems is not compliant and may void insurance.
- Should I replace flexi hoses when replacing the tap?
- Yes — flexis have a finite life and are a common burst-leak source. Any professional replacement should include new isolation valves and flexis unless recently installed.
- Why is a wall mixer so much more expensive?
- Access. The in-wall body must match the trim kit, and tiles may need cutting. Labour and coordination exceed the cost of the visible mixer alone.
Third drip repair on the same kitchen mixer this year? Call 1300 24 11 47 — we quote replacement with new valves and flexis, usually cheaper than another patch.
Related reading
Explore our Melbourne plumbing services or see what is included in leak detection and repair. For more practical detail, read Toilet Replacement Cost Melbourne: Suite Prices, Labour & Surprise Extras and Frozen Pipes Melbourne Cold Snap: Rare but Real Prevention & Thaw Tips.
Need practical help now?
Dripping or seized taps wasting water—get a Melbourne plumber to replace them via 1300 24 11 47.