If you have a slow single fixture (one basin, one shower) - try DIY first: hot water, a plunger, an enzyme cleaner. If multiple fixtures back up at once, sewer smell appears, or water comes UP through floor wastes, stop DIY and call a plumber. Two or more re-blockages within 12 months means a CCTV inspection - usually $250-$400 - will save thousands by finding the actual cause.
The 3 drain blockage types - and which is DIY-safe
- Single fixture, slow drain: Soap, hair, food in the p-trap. DIY-safe.
- Multiple fixtures, slow: Blockage in shared waste pipe or stack. Plumber needed.
- Floor waste gurgling, sewer smell, water rising: Sewer main blockage. Emergency call, do not DIY.
DIY guide - safe methods only
- Boiling water + dish soap. Slowly pour 2 litres of boiling water mixed with a tablespoon of dish soap. Works for grease.
- Plunger. Block the overflow with a damp cloth. Plunge straight up and down, not side to side.
- Bicarb + vinegar. Half cup bicarb, half cup white vinegar, leave 30 minutes, flush with hot water. Mild but useful for soap scum.
- Enzyme cleaner. Bio-One, Sanibloc or similar. Overnight treatment. Works for organic build-up. Won't damage pipes.
- Cleaning the p-trap. Place a bucket beneath, unscrew the trap, clean out, refit. Works for basin/sink blocks.
What NOT to do
- Caustic chemical cleaners (Drano). Damages PVC over time, dangerous to plumber who arrives next, can crack cast iron pipes.
- Metal coat hanger / wire into old pipes. Damages glazing on terracotta, can punch through corroded cast iron.
- Pressurised drain bombs. Risk of pipe damage and back-spray.
- Ignoring repeat blockages. Each block makes the next more likely.
Signs you need professional drain clearing
- Multiple fixtures backing up at the same time
- Floor waste in laundry, garage or under-house overflowing
- Gurgling sound when toilet flushes
- Sewer smell that doesn't fix with a p-trap top-up
- Drains slow for more than 48 hours after DIY
- Visible damp on walls, slab or under house
- Same drain blocking 2+ times a year
What CCTV drain inspection involves
A camera on a flexible rod is fed down the drain via an inspection point. Live video shows the entire pipe interior - the plumber can identify root intrusion, pipe collapse, offset joints, debris build-up or grease layers. A locator wand on the surface marks the camera's position, so any defect is mapped to a precise point in your yard (within 10cm).
Standard CCTV inspection cost Melbourne: $250-$400 for a single drain run including a written report.
Tree root intrusion in Melbourne - when relining is the fix
Melbourne's older suburbs (Brunswick, Richmond, Northcote, Camberwell, Hawthorn) have many homes still on earthenware drains 80-110 years old. Tree roots find the joints and grow into the pipe. Standard high-pressure water jetting clears them - but they grow back. After a third clearance, pipe relining (CIPP) seals the joints from the inside and stops re-growth for 50+ years.
Cost of professional drain clearing Melbourne
| Service | Cost |
|---|---|
| Single fixture clear (basin, kitchen) | $180-$320 |
| Stack or sewer clear (high-pressure jet) | $380-$650 |
| Toilet blockage - clear from inspection point | $280-$480 |
| CCTV inspection + written report | $250-$400 |
| Locate + dig small repair | $1,200-$2,500 |
| Pipe relining per metre (CIPP) | $650-$950 |
| Dig and replace per metre | $450-$1,200 |
| After-hours emergency callout surcharge | $120-$240 |
How 24/7 Service Mate handles blocked drains
Standard callout: hand auger and plunger first. If that doesn't clear it in 20 minutes, high-pressure water jetter. If repeat blockage history - CCTV inspection at half the standalone rate when bundled with the clearance. All findings on video, with locations marked on a property sketch. Quote for any further work is fixed-price, given in person before we leave.
Tree root blockages by Melbourne suburb
Inner north and east: plane trees and elms
Melbourne’s inner north — Fitzroy, Collingwood, Northcote, Preston — and inner east — Richmond, Hawthorn, Kew — are heavily lined with London plane trees and English elms planted in the Victorian and Edwardian eras. Their root systems are aggressive and extend well beyond the canopy. If your property is in one of these suburbs and you have a recurring blocked drain, tree roots entering offset clay drain joints are the most likely cause.
Plunging or chemical drain cleaners will clear the blockage temporarily but roots re-grow within weeks to months. The permanent fix is CCTV inspection followed by hydro-jet root cutting and relining, or dig-and-replace of the affected section.
Outer suburbs: fig trees and camphor laurels
In Melbourne’s middle and outer suburbs — Reservoir, Thornbury, Coburg, Box Hill, Doncaster — the common offenders are Moreton Bay fig trees and camphor laurels, both of which produce thick, woody roots that can completely fill a 100mm drain pipe. Unlike grass roots, fig and camphor roots do not clear with enzyme treatments. A CCTV camera is the only way to assess extent before quoting.
Melbourne Water’s sewer map (melbournewater.com.au) shows the location of the main sewer line beneath your street. Properties where the main sewer runs near large council nature strip trees carry higher root intrusion risk than average.
The truth about enzyme drain cleaners
Enzyme and bacterial drain treatments (products like Bio-Clean, Actizyme) work by introducing bacteria that digest organic waste — primarily soap scum, fat, and hair. They are genuinely effective as a monthly preventive maintenance product for kitchen and bathroom drains that are partially slow but not fully blocked.
They do not dissolve tree roots, break up grease plugs, or clear a fully blocked drain. If your drain is backed up, an enzyme treatment will not resolve the problem. You need mechanical clearance (hydro-jetting or drain snake) followed by CCTV to diagnose the root cause. Using enzymes when you have a root blockage delays the real fix and risks an overflow event, particularly during Melbourne’s spring when roots grow fastest.
Melbourne-specific seasonal tip
Tree roots grow most aggressively in Melbourne during September to November (spring) when soil moisture rises and tree sap is active. If you have had a partial blockage that seemed to clear itself over summer, have a CCTV inspection done in August before spring growth begins. Catching root intrusion before it causes a full blockage is significantly cheaper than an emergency callout on a weekend.
FAQ
- Will my insurance cover a blocked drain?
- Generally no for routine clearance. Major collapse caused by tree roots may be covered under "loss of access" provisions - check your PDS.
- Who owns the drain in my front yard?
- From the house to the property boundary - you. From boundary to the main - the water authority. CCTV inspection establishes location.
- How often should drains be jetted preventatively?
- Older homes with known root issues: every 2-3 years. Modern PVC systems: no scheduled maintenance needed.
- Are drain bombs and snake wire safe to use?
- On modern PVC, mostly fine. On older cast iron or earthenware - no. Damage often costs more than a plumber call.
- What's the warranty on a drain clear?
- Most plumbers warrant 14-30 days unless tree roots or unknown defect were identified.
Related reading
For local help, see our Melbourne plumbing services, plumber in St Kilda and plumber in Box Hill. Our blocked drain clearing page covers jetting and CCTV in detail. Sister read: sewer smell in the bathroom.
Drain blocked right now?
Call 1300 24 11 47. Jetter on the van. Fixed-price quote before we start.