Pipe relining in Melbourne typically costs $700–$1,800 per metre for cured-in-place (CIPP) structural lining on sewer and stormwater drains, with whole-job totals of $3,500–$12,000+ depending on length, diameter, access and prep work. Dig-and-replace on the same clay line often runs $4,000–$15,000+ when paving, landscaping or depth is involved — which is why relining is popular on root-damaged Melbourne clay drains until collapse or severe offset joints make excavation the only viable fix.
Blocked drain or CCTV showing pipe damage?
Call 1300 24 11 47 — we clear, camera and quote relining or dig-replace with footage you can see.
The short version
- CIPP pipe relining in Melbourne: typically $700–$1,800 per metre, depending on pipe diameter and access.
- Whole-job relining (3–8 m damaged section): commonly $3,500–$12,000 including CCTV, jetting and reinstatement.
- Dig-and-replace on the same section: $4,000–$15,000+ when depth, concrete, roots or council strip work is involved.
- Root intrusion in Melbourne clay drains is the number-one relining trigger — especially under established gardens in Camberwell, Kew and Essendon.
- Relining is not right for every pipe — collapsed sections, severe offsets and failed junctions often need excavation.
Why Melbourne sewers end up on the relining quote list
Melbourne's older suburbs are built on dense reactive clay. Sewer pipes laid in the 1920s through 1970s are commonly terracotta or cast iron — rigid, jointed, and vulnerable to ground movement and tree roots. A camphor laurel or plane tree 8 metres from a joint is enough to cause annual blockages that jetting alone will not fix long term.
Homeowners in Brighton, Hawthorn and Northcote often face the same decision: pay for another hydro-jet clear ($350–$750) knowing roots will return in 6–18 months, reline the damaged section for a 25–50 year structural fix without digging the garden, or excavate and replace the pipe — the right call when the pipe has collapsed or joints have offset more than about 10% of the diameter.
Pipe relining vs dig-and-replace: cost comparison 2026
| Scenario | Relining (CIPP) | Dig-and-replace | When each wins |
|---|---|---|---|
| 3 m root-damaged clay sewer under lawn | $3,500–$6,500 | $4,500–$8,000 | Relining if pipe shape is intact |
| 5 m section under concrete driveway | $5,500–$9,000 | $8,000–$14,000+ | Relining avoids cutting concrete |
| Collapsed or bellied pipe | Not suitable | $6,000–$15,000+ | Excavation required |
| Severe joint offset (>10%) | Not suitable | $5,000–$12,000+ | Excavation required |
| Full boundary-to-kerb replacement | $8,000–$18,000 (long runs) | $12,000–$25,000+ | Compare on CCTV scope and access |
| Stormwater line under paved courtyard | $4,000–$8,000 | $7,000–$13,000+ | Relining if diameter ≥100 mm and structurally round |
These are Melbourne market guides, not guarantees. Every job should start with a drain camera inspection so you are paying for a fix matched to the actual defect — not a default recommendation.
What CIPP relining includes (and what it costs extra)
Standard inclusions on a quality relining quote
- CCTV survey before and after lining.
- Hydro-jet or mechanical prep to remove roots, scale and grease.
- Resin-impregnated liner insertion and cure (steam, hot water or UV depending on system).
- Reinstatement of inspection openings.
- Written warranty (commonly 10–35 years depending on provider and pipe condition).
Common add-ons
- Boundary trap replacement if the trap itself is cracked: $800–$2,500.
- Junction reinstatement (branch lines): $400–$900 per junction.
- Deep access pit excavation for entry: $600–$2,000.
- Council or water authority strip reinstatement: quoted separately.
- Post-reline root barrier or periodic jet maintenance: optional ongoing cost.
CIPP relining vs other trenchless methods
Most Melbourne residential relining quotes refer to CIPP — a resin-impregnated liner cured inside the existing pipe. Other trenchless options exist but are less common on house drains:
- CIPP (inversion or pull-in): Best for continuous runs of 2–15 m with round profile. This is what most $700–$1,800/m quotes describe.
- Pipe bursting: Fractures the old pipe while pulling new PE through — used when diameter must increase or pipe is too weak for lining. Often priced closer to dig-replace on short runs.
- Spot repairs / localised liners: 1–2 m patches at a single joint — $1,200–$2,800 per spot depending on access. Useful when CCTV shows one bad joint and the rest is sound.
Your plumber should match method to footage. Paying for full-length CIPP when only one joint has failed is overspending; lining a collapsed pipe is impossible regardless of price.
Root damage in Melbourne clay drains: what affects relining price
Pipe diameter and length
100 mm house drains and 150 mm sewer mains carry different liner material costs and installation time. Longer continuous runs spread setup costs; multiple short patches in a badly jointed line can cost more per metre than one clean 4-metre section.
Access points
Relining needs an entry and exit point — usually an inspection opening, boundary trap or pulled toilet. If the only access is 2.5 metres deep in a clay pit under a nature strip in Moonee Ponds, excavation to create access adds significantly before the liner price is quoted.
Degree of root intrusion and prep time
Light root hair in one joint is a quick jet. A pipe packed with root mass over 6 metres may need hours of prep, cutter work and multiple passes before the liner will bond. Prep time is a major reason two "per metre" quotes for the same length can differ by thousands.
Groundwater and pipe condition
If the pipe holds water during prep, dewatering or inversion timing changes. Ovality, fractures and missing bedding visible on CCTV may disqualify relining — pushing you toward dig-replace regardless of garden preference.
Tree species and recurrence risk
Plane trees and figs on Melbourne nature strips are aggressive. Relining seals the joint permanently, but roots can find the next weak point. A good plumber shows you the footage and explains whether relining one section solves the problem or whether tree management or full replacement is smarter long term.
Melbourne council and authority considerations
Work on sewer drains near a boundary trap may sit on a Melbourne Water or local council easement. Dig-and-replace on a nature strip in Boroondara or Stonnington can need permit time and reinstatement to authority spec — costs that do not apply to trenchless relining from an internal access point. If your plumber mentions "authority strip," ask whether relining avoids that line item entirely.
Shared sewer lines in older terrace rows — common in Carlton and Fitzroy — mean one owner's relining scope may depend on neighbour pipe condition. CCTV both directions from the boundary trap before quoting a single-owner fix.
What a fair pipe relining quote should include
- CCTV footage of the defect with metre markers — you should see what they see.
- Exact length and diameter being lined, and which sections are excluded.
- Prep method (jet, cutter, both) and whether prep is included or capped.
- Liner type, design life and warranty terms in writing.
- Clear statement of what happens if the pipe fails inspection after prep — e.g. pivot to dig-replace pricing.
- Whether council or authority notifications are included.
Red flags: quoting relining without CCTV, per-metre pricing with no measured length, or pressure to decide before you have seen the footage. For a deeper comparison framework, see our pipe relining vs dig and replace guide.
How 24/7 Service Mate approaches relining quotes
We clear the blockage first so the camera sees the pipe — not just standing water. You get footage, a plain-English explanation of the defect, and two paths where both are viable: reline and dig-replace. We do not push relining when the pipe is collapsed or offsets are too severe; excavation is sometimes the honest answer.
Where relining is appropriate, we quote the measured length, prep scope, junction work and warranty. If prep reveals worse damage than the camera suggested, we stop and requote before resin is committed.
See sewer and stormwater maintenance and blocked drain clearing, or start at Melbourne plumbing services.
FAQ
- How much does pipe relining cost per metre in Melbourne?
- Structural CIPP relining typically runs $700–$1,800 per metre in 2026, depending on diameter, access and prep. Whole jobs are usually quoted as a package after CCTV measurement.
- Is pipe relining cheaper than digging up my garden?
- Often yes when the pipe is structurally round and access is difficult — under driveways, established trees or paved courtyards. It is not cheaper when the pipe has collapsed; excavation is then unavoidable.
- How long does relined pipe last?
- Quality CIPP liners are rated for decades. Warranties commonly run 10–35 years. The existing pipe must be suitable — relining does not fix a pipe that has already lost its shape.
- Will roots grow back after relining?
- Not through the lined section — the liner is a continuous structural tube. Roots can still enter at unlined joints elsewhere. CCTV the full run, not just the blocked section.
- Does homeowners insurance cover pipe relining in Melbourne?
- Depends on your policy and the cause. Sudden accidental damage is sometimes covered; gradual tree root ingress and wear often are not. Check your PDS and document the CCTV evidence for any claim.
Annual blockages from the same tree? Call 1300 24 11 47 — we camera the line and quote relining only where the footage supports it.
Related reading
Explore our Melbourne plumbing services or see what is included in blocked drain clearing. For more practical detail, read Burst Pipe Shutoff Melbourne: Stop the Flood in Minutes and Toilet Replacement Cost Melbourne: Suite Prices, Labour & Surprise Extras.
Need practical help now?
Considering no-dig sewer repair—ask for Melbourne pipe relining pricing after CCTV on 1300 24 11 47.