Melbourne summers are legendary for their extremes — 40°C days that push every air conditioner to the limit. Here are the real reasons your AC might fail when you need it most, and what you can actually do about it.
You've survived the build-up. The forecast says 40°C. You reach for the remote, press Cool, and nothing happens. Or worse — it turns on, blows warm air, and shuts itself down ten minutes later.
This scenario plays out in thousands of Melbourne homes every summer. And while some causes require a licensed technician, others have quick DIY fixes you can try right now. Let's break it down.
1. Dirty or Blocked Air Filter
This is the most common and most overlooked cause of poor AC performance — and it's entirely preventable.
Your air conditioner's indoor unit has a filter that traps dust, pet hair, and particles before they reach the coil. When that filter becomes clogged, airflow is restricted. The evaporator coil can't absorb heat properly, efficiency drops, and in severe cases the coil freezes solid — causing the unit to stop cooling entirely.
Fix it yourself: Most split system indoor units have a sliding front panel. Open it, remove the mesh filter, wash it under cold water, let it dry completely, and reinstall. Do this every 4–6 weeks during heavy use periods. Takes about 10 minutes.
2. Blocked Outdoor Unit
Your outdoor condenser unit needs clear airflow to reject heat from the refrigerant. In a 40°C heatwave, it's already working hard. If the unit is surrounded by overgrown plants, covered in debris, or has its airflow blocked by a fence or stored items — it's fighting a losing battle.
An overheating compressor will trigger a thermal protection cutout and shut down the unit. It may restart once it cools, only to shut down again minutes later.
Fix it yourself: Check around the outdoor unit. Clear any leaves, overgrowth, or objects within 600mm of the unit on all sides. If the unit is in direct sun, see if temporary shade (not blocking airflow) is possible. Don't spray water directly onto the unit while it's operating.
3. Refrigerant Leak or Low Gas
Refrigerant (gas) is the substance that actually moves heat from inside your home to outside. If your system has a refrigerant leak, cooling capacity drops significantly — and the system may continue to run while barely making a dent in the temperature.
Signs of low refrigerant include:
- The air blowing from the indoor unit is only slightly cool, not cold
- Ice forming on the indoor unit or the refrigerant pipework
- The outdoor unit running continuously without the indoor temperature dropping
- Hissing or bubbling sounds from the pipework
What to do: This requires a licensed and ARC-accredited technician. Refrigerant handling is legally restricted in Australia. Don't attempt to recharge the system yourself — a leak must be found and repaired before adding more gas, or you'll just be releasing it into the atmosphere again. Call us on 1300 24 11 47.
4. Failed Capacitor
The capacitor is a small electrical component that provides the initial surge of power needed to start the compressor and fan motors. On extremely hot days, the capacitor is under increased stress. When it fails, the motors won't start — and the AC simply won't cool.
This is one of the most common summer service calls we attend. The good news: a capacitor replacement is usually a straightforward job for a licensed technician and is one of the more affordable AC repairs.
What to do: If your AC turns on (you can hear it trying) but the outdoor unit fan isn't spinning, or the unit starts briefly then shuts off — a failed capacitor is a likely culprit. Call a licensed technician.
5. The System Is Simply Undersized
Every air conditioner is rated for a specific area at a specific ambient temperature. That rating is usually based on a 35°C outdoor temperature. On a 42°C day, every AC unit is effectively operating beyond its design parameters.
If your system was marginal to begin with — perhaps installed 15 years ago when it was the right size, but your family has grown and you've added a conservatory since — a serious heatwave will expose the gap between what your system can deliver and what you need.
This isn't a fault. But it might be the motivation you need to consider an upgrade before next summer.
6. Thermostat or Remote Issues
Before you panic, check the basics. Is the remote's battery flat? Is the thermostat set correctly? Does the display on the indoor unit respond? Sometimes the simplest explanation is the right one.
Also check: is the mode set to COOL (not FAN or DRY)? Is the set temperature actually lower than the current room temperature? We've attended "emergency" callouts that turned out to be a drained remote battery.
When to Call a Professional
Call a licensed HVAC technician if:
- The outdoor unit isn't running (can't hear or feel the compressor)
- Ice is forming on the indoor unit or pipework
- You can hear unusual noises — grinding, screeching, or banging
- The air coming out smells musty, mouldy, or burning
- The system throws an error code on the display
- You've replaced the filter and cleared the outdoor unit but it's still not cooling
Our HVAC technicians are available 24/7 across Melbourne — including during heatwaves when demand is at its peak. We carry common parts on our vans so most faults are resolved on the first visit.
Call 1300 24 11 47 or book a callout online.
Pro tip: Service before summer, not during it
The best time to have your AC serviced is in spring — October or November — before the heat peaks. A service includes cleaning coils, checking refrigerant, testing capacitors, and clearing drains. It's a fraction of the cost of an emergency callout and dramatically reduces the chance of failure when you need the system most.
FAQ
- Why does my AC stop cooling when it’s very hot outside?
- At extreme temperatures (above 38°C) some systems reach their rated capacity limit and can no longer lower the indoor temperature further. This is normal but may indicate the unit is undersized for the room. Ensure the outdoor unit has clear airflow and is not in direct afternoon sun if possible.
- My aircon is blowing air but it’s not cold — what’s wrong?
- The most common causes are a clogged filter reducing airflow, low refrigerant (gas leak), or a failed compressor. Check and clean the filter first. If that doesn’t help, call a licensed HVAC technician — refrigerant work requires an ARC licence.
- How often should I service my split system?
- Once per year minimum. Ideally service before summer (October–November in Melbourne) so the system is clean and fully charged before peak demand. A service typically costs $120–$200 and includes filter cleaning, coil inspection, refrigerant pressure check, and drain clearing.
- Can I add gas (refrigerant) myself?
- No. In Australia, handling refrigerants requires an ARC (Australian Refrigeration Council) refrigerant handling licence. Adding refrigerant without finding and repairing the leak is also a waste of money — it will escape again.
AC not cooling?
24/7 Service Mate’s licensed HVAC technicians service all split system brands across Melbourne. Same-day and emergency bookings available.
Call 1300 241 147Related reading
For local help, see our Melbourne HVAC services, HVAC technician in Richmond, HVAC technician in St Kilda. Our emergency HVAC repair in Richmond page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency HVAC repair in Richmond. Related guides: air conditioner not turning on in Melbourne, AC blowing warm air in 35 degree heat - 4 fixes you can try, and when to call us, Air conditioner ice on the lines - 5 reasons why and 1 you should never ignore.