Infographic diagram for Continuous flow hot water install cost Melbourne 2026: gas instantaneous.
Plumbing

Continuous flow hot water install cost Melbourne 2026: gas instantaneous pricing guide

Steve · Licensed Plumber 8 min read

Continuous flow hot water install cost Melbourne: the short version

Infographic summarising the key points of Continuous flow hot water install cost Melbourne 2026: gas instantaneous pricing guide.

Continuous flow (instantaneous) gas hot water installation in Melbourne typically costs $2,200–$3,800 for a like-for-like outdoor unit, with higher totals when gas pipe upsizing, relocation, flueing or difficult access is required. The appeal is endless hot water and a smaller footprint than storage cylinders — if gas supply and water flow rates are adequate.

Need a continuous flow quote?

Call 1300 24 11 47 — we size litre-per-minute demand and gas supply before recommending a unit.

The short version

  • Typical outdoor continuous flow supply + install: $2,200–$3,800 in Melbourne.
  • Relocation, long hot runs, or gas upsizing: often push totals toward $3,500–$5,000+.
  • Indoor units need compliant flueing — budget extra for flue materials and labour.
  • Size by simultaneous fixtures (L/min), not just household headcount.
  • Licensed gasfitter/plumber required — DIY gas work is illegal and dangerous.

What continuous flow systems do well

Instantaneous units heat water on demand. There is no storage tank to run cold after three showers, and wall-hung outdoor models free up cupboard space in apartments and townhouses. They suit Melbourne homes already on natural gas that want strong simultaneous performance — two bathrooms plus a kitchen — provided the unit’s flow rating and the gas meter/pipework can keep up.

They are less ideal when gas is being removed from the property, when water pressure/flow is already poor, or when someone wants the lowest possible running cost regardless of fuel (heat pumps often win that comparison on electricity). Buyer context: best hot water system Melbourne 2026.

Install cost breakdown 2026

Item Typical Melbourne range
Unit supply (common 20–26 L/min class)$1,100–$2,000
Standard outdoor like-for-like install$1,100–$1,800
Combined supply + install (simple)$2,200–$3,800
Gas pipe upgrade / meter considerations$300–$1,500+
Relocation / long pipe runs$400–$1,200+
Indoor flueing package$400–$1,200+
Tempering valve (bathrooms)Usually included in compliant install

Quotes should state whether disposal of the old unit, tempering, isolation valves and gas compliance documentation are included.

What changes the price on Melbourne sites

Gas supply capacity

A high-flow unit on undersized pipework will underperform or fail to ignite reliably when multiple outlets open. Steve checks meter capacity and pipe sizing against the unit’s MJ requirements. Heritage terraces with old gas runs are frequent upgrade candidates.

Location and access

Side paths in Fitzroy, balcony mounts in Southbank, and rear laneway access in Brunswick change labour time. Upper-level installs may need scaffolding.

Water quality and scale

Some Melbourne water supplies are harder than others. Scale reduces heat exchanger life — ask about service access and flushing. Recurring issues are covered in continuous flow hot water problems.

Cold water sandwich and flow limits

Users sometimes notice temperature fluctuation when taps open and close quickly. Right-sizing and quality brands reduce complaints; no unit invents water pressure your street does not have.

Continuous flow vs storage vs heat pump (install mindset)

Choice Install notes
Continuous flow gasNeeds gas + adequate flow; compact outdoor footprint
Gas storageSimpler swap often; tank space required
Heat pumpElectrical + clearance; different incentive story

Replacement cost tables: hot water replacement cost Melbourne 2026.

Compliance

Gasfitting and plumbing must be performed by licensed practitioners. Tempering to 50°C for bathroom outlets applies on new installs. Ask for compliance documentation with the invoice. VBA licensing reference: Victorian Building Authority.

Gas safety

If you smell gas, evacuate and contact the emergency gas number on your meter/retailer information — do not attempt DIY gas repairs. For suspected leaks indoors, see our gas smell guidance culture: leave the investigation to licensed gasfitters.

How 24/7 Service Mate quotes continuous flow

We count bathrooms and peak use, check existing gas and flue conditions, then recommend a litre-per-minute class that matches real demand. Service page: hot water repair and replacement. Gas scope sits with gas fitting services.

Choosing litre-per-minute rating without overbuying

Marketing charts show impressive L/min numbers measured under ideal conditions. Incoming cold-water temperature in Melbourne winter reduces delivered mixed flow at the tap. A unit that barely meets simultaneous demand in January may disappoint in July. Steve sizes with winter performance in mind for family bathrooms, and explains where a modest storage hybrid or a second tempering strategy may be smarter than an oversized wall unit on weak gas pipe.

Controller placement, error-code readability, and service clearances affect long-term ownership. Units jammed against boundaries without service access become replacement jobs instead of repair jobs.

Switching from electric storage to gas continuous flow

This is more than swapping boxes. You need a gas pathway, possible meter check, outdoor mounting, and electrical for ignition/controls where relevant. Copper hot runs may need redesign if the old cylinder was central and the new unit is on a remote wall — dead-leg waits for hot water annoy users more than brochure photos suggest. Factor copper and insulation into the quote comparison against heat pump pathways.

Service and scale management

Ask about flushing ports and recommended service intervals. Harder water areas accelerate scale on heat exchangers. A cheaper unit that cannot be serviced economically is a false saving beside a mid-range unit with local parts support.

Indoor versus outdoor unit decisions

Outdoor units dominate Melbourne installs for simplicity. Indoor units appear when outdoor walls are impossible — apartments, heritage streetscapes, or body-corp restrictions. Indoor means flueing, combustion air and stricter clearances. Price the flue package honestly; an “indoor unit special” that omits flue labour is not a special.

Recirculation loops

Large homes with long hot runs sometimes add recirculation for instant hot water at distant baths. That is a separate design with pump energy and heat loss trade-offs. Discuss whether you truly need it versus relocating the continuous-flow unit closer to bathrooms.

Warranty and service access

Keep clearance for heat-exchanger service. Units installed hard against fences without removable access panels become replace-only assets. Photograph the completed install model/serial plate for warranty claims and future rebate paperwork if you later switch technologies.

Apartment and OC constraints

Balcony mounts need weather rating, drip management and sometimes acoustic consideration. Owners corporations may restrict flue terminals or outdoor units visible from courtyards. Get approval before purchasing. Internal cupboards with continuous-flow require strict flue and clearance compliance — this is specialist gas work, not a casual Saturday job.

Comparing continuous flow quotes fairly

Align litre-per-minute class, inclusion of tempering, disposal, gas upgrades, and warranty length. A low sticker price that excludes gas pipe upsizing will climb on site. Ask what happens if water flow at the meter is lower than assumed — some homes need pressure/flow investigation before committing to instantaneous technology.

If you are undecided between continuous flow and heat pump, request both gross prices and a running-cost sketch with stated assumptions. Decide with numbers, not brochure photography.

Seasonal demand and guest loads

Christmas guests and weekend Airbnb turnovers expose flow limits. If your home doubles as a short stay, size continuous flow for peak occupancy, not average. Alternatively, a heat pump with larger storage may buffer peaks better for some households — compare both on a winter morning scenario with two showers overlapping.

Ask Steve to model that scenario in the quote conversation so you are not surprised after install.

Final buying tip

Order the unit only after gas capacity and mounting location are confirmed. Online bargains that cannot be installed legally at your address are not bargains. A written Melbourne site quote from a licensed gasfitter protects both timeline and wallet when the alternative is a refund fight with a retailer.

Keep the old system’s gas compliance history if available — it helps diagnose inherited pipe sizing issues when commissioning the new continuous-flow unit.

Confirm flue terminals and outdoor clearances against the manufacturer sheet during the quote visit, not after the unit is on site.

FAQ

Is continuous flow cheaper to run than gas storage?
Often moderately cheaper because you are not standing-heat losses from a tank, but actual bills depend on tariff and usage patterns.
Can I install continuous flow without existing gas?
You would need a new gas connection or LPG arrangement — usually a larger project than a simple unit swap. Many all-electric homes consider heat pump instead.
How long does installation take?
Like-for-like outdoor swaps are often same-day. Relocations and gas upgrades take longer.
What size unit do I need?
Base it on simultaneous fixtures and incoming water temperature. A plumber should calculate, not guess from marketing labels alone.

Explore our Melbourne plumbing services or see what is included in hot water repair and replacement. For more practical detail, read Heat Pump Hot Water VEU Rebate Melbourne: Eligibility & Net Cost Guide and Best Hot Water System Melbourne 2026: Heat Pump, Gas & Electric Compared.

Replacing a storage unit with continuous flow?

Call 1300 24 11 47 — get L/min sizing and a written Melbourne install quote before you buy the unit online.

Need a Melbourne plumbing technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.