Hot Water System Types: Gas, Electric, Heat Pump and Solar for Melbourne
Plumbing

Hot Water System Types: Gas, Electric, Heat Pump and Solar for Melbourne 2026

Steve · Licensed Plumber 11 min read

Hot Water System Types: what to check

Infographic: Hot Water System Types: what to check.

Melbourne homeowners replacing a hot water system in 2026 face four main technology choices: gas storage, electric storage, continuous flow (gas or electric), heat pump, and solar-boosted. Each has a different upfront cost, running cost, and eligibility for Victorian government rebates. This guide, reviewed by Steve, our licensed Melbourne plumber, gives you an honest comparison so you can make the right call before committing $1,500–$9,000.

Hot water system comparison table: Melbourne 2026

System typeInstall cost (Melbourne)Annual running costVictorian rebateBest for
Gas storage$1,900–$3,200$350–$600NoExisting gas connection, large household
Electric storage$1,500–$2,800$600–$1,000+NoSolar self-consumption, controlled-load tariff
Gas continuous flow$2,200–$3,800$280–$500NoUnlimited hot water, space-saving wall mount
Heat pump$3,800–$6,500 (before rebate)$150–$300Up to $1,400 + STCsLowest running cost, long-term saving
Solar electric-boosted$5,000–$9,000$80–$200STCs + Solar VictoriaLarge north-facing roof, lowest lifetime cost

Gas storage hot water

How gas storage works

A gas burner at the base of an insulated tank (90–315 litres) heats water continuously as the stored water cools. Gas storage is the most common hot water system type in Melbourne homes and has been the default replacement option for decades. Main brands serviced across Melbourne: Rheem, Rinnai, Dux, and Aquamax.

When gas storage makes sense

If you already have a gas connection and need an urgent replacement for a failed system, like-for-like gas storage is the lowest-cost immediate path. The supply chain is deep, the installation is straightforward for any licensed Melbourne plumber, and the job is typically complete within a half-day. If the system is over 10 years old and you are replacing anyway, it is worth comparing the lifetime cost against a heat pump with the current Victorian rebate before committing to another gas unit.

Pros, cons and gas price context

  • Pro: Widely available, well-serviced by all Melbourne plumbers, simple like-for-like replacement
  • Pro: Lower upfront cost than heat pump or solar
  • Pro: Consistent hot water supply regardless of electricity tariff or weather
  • Con: Victorian gas retail prices have increased significantly in recent years and the long-term tariff trajectory is uncertain given the state’s gas phase-out policy
  • Con: Standby heat loss — the burner cycles continuously to maintain water temperature even overnight
  • Con: Not eligible for the 2026 Solar Victoria rebate

Electric storage hot water

How electric storage works

An electric resistance element inside the tank heats water directly, operating like a large kettle. On a standard flat tariff, electric storage carries the highest running cost of any system type. On a controlled-load (off-peak) tariff — where a dedicated circuit runs the system at overnight rates — costs are more competitive.

Solar self-consumption: when electric storage wins

The case for electric storage has improved substantially for Melbourne homeowners with solar PV. If you schedule the hot water system to run during peak solar generation hours (typically 10 am–2 pm in Melbourne), a large proportion of running costs is offset by your own generation at effectively zero marginal cost. This requires a programmable timer, a Solarwise diverter device, or smart home control. Without solar panels or a controlled-load tariff, electric storage is the most expensive option to run in 2026. Check your electricity tariff structure before choosing.

Sizing electric storage for Melbourne

A 160–250 litre tank suits most Melbourne households of 3–4 people. Larger families or high-demand households may need 315–400 litres. Running a larger tank than necessary increases energy consumption without benefit, so correct sizing at installation matters.

Gas continuous flow hot water (instantaneous)

How continuous flow works

No storage tank. A gas heat exchanger fires only when hot water is drawn — it heats the water on demand and stops the moment the tap is turned off. Unlimited supply as long as gas is flowing, and no standby heat loss. The main brands installed across Melbourne are Rinnai, Bosch, and Rheem. Continuous flow requires adequate gas pressure and an external wall for the flue exhaust, so it is not suitable for all apartment configurations.

The cold-water sandwich explained

When you turn a continuous flow tap back on a few minutes after turning it off, a brief burst of cold water — the residual water left in the pipe — precedes the new hot water. This is called the “cold-water sandwich” and is a normal characteristic of the technology, not a fault. It is most noticeable in kitchens where the sink is used frequently with short intervals between uses.

Continuous flow pros and cons

  • Pro: Unlimited hot water — it cannot run out during back-to-back showers or a full household morning rush
  • Pro: No standby heat loss — only burns gas when hot water is being drawn
  • Pro: Compact wall-mount — no large storage tank in a utility room
  • Con: Cold-water sandwich effect at restarts
  • Con: Higher service complexity compared to storage systems — the heat exchanger, burner, and electronic controls require periodic professional servicing
  • Con: Victoria’s gas price trajectory makes long-term running costs uncertain

Heat pump hot water

How heat pump technology works — and why it leads on running cost

A heat pump uses a refrigerant circuit to extract ambient heat from the surrounding air and transfer it to the water in the storage tank. It runs on the same thermodynamic principle as a reverse-cycle air conditioner, operating in the same direction as its heating mode. Because the system moves heat rather than generating it from scratch, a heat pump uses 60–75% less electricity than a direct electric element to produce the same volume of hot water.

Modern heat pump models operate effectively down to approximately −5°C, well below Melbourne’s winter minimums in even the coldest southern and eastern suburbs. The unit can be installed outdoors, in a garage, or in a utility room with adequate airflow — at least 10–15 m³ of surrounding air volume is recommended for optimal efficiency. Main brands available in Melbourne: Reclaim Energy, Sanden, Rheem, Dux, and Stiebel Eltron.

Victorian government rebates for heat pumps in 2026

Heat pump hot water is the strongest incentive target in Victoria’s energy efficiency policy for households in 2026:

  • Solar Victoria Hot Water Rebate: Up to $1,400 for eligible Melbourne households replacing a gas, electric, or continuous-flow system with a heat pump. Check current availability and the eligible product list at solar.vic.gov.au/hot-water-rebate.
  • Small-scale Technology Certificates (STCs): A federal government scheme that provides an approximate $700–$1,100 point-of-sale discount on qualifying heat pump systems, administered through the Clean Energy Regulator’s Small-scale Renewable Energy Scheme.
  • Effective installed cost after rebate: A heat pump system listed at $4,500–$6,500 typically costs $2,300–$4,200 after the Solar Victoria rebate and STC discount are applied at the point of sale.

Things to check before buying a heat pump in Melbourne

  • Space requirements: Heat pump units are larger than gas storage systems — you need approximately 1 m² floor area and 10–15 m³ of surrounding air volume for efficient operation
  • Noise level: The heat pump fan produces approximately 45–55 dB at one metre — comparable to a quiet air conditioner. Not recommended directly under a bedroom window; side or rear yard placement is typical
  • Electrical connection: Heat pumps run on a standard 10A power outlet. Most Melbourne homes require no electrical upgrades, but your plumber should confirm this during the quoting visit
  • Shading and cold air return: A heat pump placed in a heavily shaded or enclosed space where cold air pools will operate less efficiently in winter — plan placement accordingly

Solar hot water

How solar hot water works

Solar collector panels mounted on the north-facing roof absorb the sun’s thermal energy and transfer it to a storage tank via a heat exchanger. On overcast Melbourne days, an electric or gas booster heats the water to the required temperature. Solar hot water has the lowest lifetime running cost of any system but the highest upfront cost and requires substantial north-facing roof space.

Is solar hot water right for your Melbourne home?

Solar hot water performs best in Melbourne’s outer and middle ring suburbs — Box Hill, Camberwell, Ringwood, Dandenong, Frankston, Footscray, and Broadmeadows — where properties typically have more north-facing roof area and fewer shading obstructions than inner-city terrace homes. Inner-city Melbourne homes with multiple-storey neighbours, limited roof access, or predominantly east-west orientation are often better served by a heat pump.

Victorian rebates for solar hot water

Solar hot water systems are eligible for Small-scale Technology Certificates (STCs) under the federal government scheme, providing a point-of-sale discount. Some solar hot water products also qualify for the Solar Victoria hot water rebate. Check the current eligible product list at solar.vic.gov.au before purchasing.

Which hot water system suits your Melbourne home?

Your situationBest choiceReason
Emergency replacement of failed gas storage, budget is tightGas storage (like-for-like)Lowest immediate cost, fastest installation, no electrical work needed
Replacing any system, want the lowest running cost long-termHeat pump (with Victorian rebate)Up to $1,400 + STCs cuts upfront cost; 60–75% less electricity than direct electric
Have solar PV panels, no existing gas connectionHeat pump or solar-timed electric storageHeat pump is more efficient year-round; electric storage timed to solar generation also works
Large family needing unlimited hot waterGas continuous flowNo storage capacity to run out of; handles back-to-back use
Rental property, want simplest and most tenant-proof optionGas continuous flow or gas storageWidely understood, easy to service, minimal tenant education required
Large unshaded north-facing roof, want lowest 20-year lifetime costSolar hot waterLowest running cost for homes with strong solar access
No gas connection at all, planning for the futureHeat pumpFully electric, eligible for Victorian rebates, future-proof against rising gas costs

Victoria’s gas transition and future-proofing your hot water investment

What the Victorian gas phase-out means for households

The Victorian Government has legislated to phase out gas connections in new residential construction and has signalled a long-term transition away from household gas across the existing building stock. While existing gas connections in Melbourne are not being forcibly disconnected, the policy and energy market trajectory points clearly toward rising gas retail tariffs and declining government support for gas appliance purchases over the coming decade.

The Australian Energy Regulator’s consumer energy resources guidance outlines the transition pathway. For more information on comparing system types from a federal energy efficiency perspective, see the Australian Government’s hot water systems guide at energy.gov.au.

Future-proofing your hot water decision

A heat pump or solar hot water system installed in 2026 will have a 10–15 year service life, spanning the period when Victorian gas tariffs are expected to rise most significantly. The combination of current Victorian rebates and the long-term running cost advantage makes heat pump the most financially logical choice for Melbourne homeowners who are not replacing an emergency failure under time pressure. If your gas system has 3–5 years of life remaining, it is worth obtaining a heat pump quote now rather than waiting for a crisis replacement when urgency removes your negotiating position.

What happens at a hot water system installation in Melbourne

What your licensed plumber does on installation day

A VBA-registered Melbourne plumber will disconnect the existing system, drain the storage tank, remove the old unit, install and position the new system, make all cold water inlet and hot water outlet connections, commission the system, test for correct temperature output (minimum 60°C at the storage tank per AS/NZS 3500.4 to prevent Legionella growth), and test for any leaks at all joints.

For gas system installations, this includes a full gas leak test on all connections. For heat pump installations where a new electrical outlet or circuit is required, a licensed electrician must complete the electrical connection — the plumber and electrician coordinate this at scheduling.

Plumbing permits and VBA compliance in Victoria

All hot water system installations in Victoria require a plumbing permit under the Building Act 1993. Your plumber applies for and manages this permit; you should not need to apply separately. If an electrical connection is required (heat pump, electric storage), a separate electrical permit is also required from your licensed electrician. Your installer must provide a Certificate of Compliance for all regulated work. For information on VBA compliance requirements, see vba.vic.gov.au/plumbers/consumer-information.

Hot water system lifespan and warranty in Australia

System typeExpected lifespanTypical product warrantyKey service interval
Gas storage10–15 years5–10 years (tank)Anode rod inspection at 6–8 years
Electric storage10–15 years5–10 yearsAnode rod inspection every 5 years
Gas continuous flow15–20 years3–5 years (parts)Annual service; heat exchanger descaling every 5 years in hard water areas
Heat pump10–15 years5–7 yearsFilter clean annually; refrigerant pressure check every 5 years
Solar hot water (collectors)20+ years5–10 yearsAnnual inspection; heat transfer fluid replacement every 5–10 years

A hot water system that fails before 10 years may indicate an installation fault, scale buildup from hard water, or a missing anode rod maintenance. The anode rod is a sacrificial magnesium rod inside the tank that corrodes in place of the tank lining — when it is fully corroded, the tank wall begins to corrode instead. Many Melbourne homeowners are unaware of its existence until the tank fails prematurely. Ask your plumber to inspect it at the 6–8 year mark.

For problems with your existing hot water system, see our guides: hot water repair vs replace and hot water no pressure Melbourne.

Frequently asked questions

How long do hot water systems last in Melbourne?
Gas and electric storage systems typically last 10–15 years. Continuous flow gas systems last 15–20 years with regular annual servicing. Heat pumps last 10–15 years. Solar collector panels often last 20 years or more, though the storage tank and booster have standard storage system lifespans.
Can I switch from gas hot water to electric in Melbourne?
Yes. Your plumber caps and disconnects the gas supply line and connects the new electric or heat pump system to the hot and cold water supply. If a new electrical circuit or outlet is required for the new system, a licensed electrician handles that element. The full installation, including both trades, is typically completed within one day.
Is the Solar Victoria heat pump rebate still available in 2026?
The Solar Victoria hot water rebate has been available and well-funded through recent financial years for eligible heat pump systems. Availability and rebate amounts change annually based on government allocation. Check the current status and eligible product list before committing at solar.vic.gov.au/hot-water-rebate.
What size hot water system does a Melbourne household of four need?
For gas or electric storage: a 160–250 litre tank suits most households of 3–4 people. For continuous flow: flow rate in litres per minute matters more than tank capacity — a 26 L/min unit handles 2–3 simultaneous hot water outlets. For heat pump: 200–270 litre tanks are the most common choice for a family of four in Melbourne.
How much does it cost to run a hot water system in Melbourne in 2026?
Approximate annual running costs at 2026 Melbourne retail tariffs: gas storage $350–$600; electric storage $600–$1,000 (flat tariff) or $300–$500 (controlled-load off-peak); gas continuous flow $280–$500; heat pump $150–$300; solar hot water $80–$200. These figures assume average usage of approximately 200 litres per day for a household of four.
How quickly can a plumber replace a hot water system in Melbourne?
A straightforward like-for-like gas or electric storage replacement can be completed in 2–4 hours. Heat pump installations take 3–6 hours including commissioning. 24/7 Service Mate can dispatch a licensed Melbourne plumber for same-day hot water replacement throughout the inner and middle suburbs for most standard units held in stock. Call 1300 24 11 47 to confirm availability.

Not sure which system suits your Melbourne home?

Call 1300 24 11 47 — our licensed plumbers advise on the best-value option including all current Victorian rebates. Fixed-price quotes, same-day availability.

For local help, see our Melbourne plumbing services, plumber in Richmond, plumber in Footscray. Our hot water system repair and replacement page covers scope, pricing and 24/7 dispatch. Emergency? See our emergency plumber in Richmond. Related guides: 6 Common Continuous Flow Hot Water Problems in Melbourne and How to Fix Them, Heat Pump Hot Water Melbourne 2026: Cost, Victorian Rebate, Running Costs, and What Installation Involves.

Need a Melbourne plumbing technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.