Licensed Melbourne electrician inspecting a switchboard
Electrical

Kitchen renovation electrical cost Melbourne 2026: extra circuits, lighting and the board

Kevin · Licensed Electrician 5 min read

A kitchen reno is where undersized circuits show up. New ovens, induction, dishwashers and downlights rarely fit on the original two powerpoints. Price the electrical as its own line, not a surprise in week three of tiling.

The short version

  • Price the electrical as its own line, not a surprise in week three of tiling.
  • Induction, a wide oven, a dishwasher and a rangehood each want their own circuit or a properly sized one.
  • The switchboard is the gate: no spare ways or no safety switches means an upgrade first.
  • Two visits: rough-in before the plaster and cabinets, fit-off after the splashback.
  • Costs below are guides only. Your kitchen is not an average kitchen.

What a modern Melbourne kitchen actually draws

A kitchen built in the 1980s had one oven circuit, a couple of double powerpoints and a fluorescent tube. A kitchen built today expects an induction cooktop (up to 7 kW on a single appliance, sometimes more), an electric wall oven, a dishwasher, a fridge, a microwave, an under-bench wine fridge, a rangehood, and a few dozen LED downlights. Add a coffee machine and a kettle running at breakfast and the old wiring has no margin.

Induction in particular is the one that catches people. Related: induction cooktop power requirements and dedicated circuits for high-power appliances. If you are switching from gas, the cooktop circuit, the cable and the breaker are new, and the supply to the house may need a look.

Switchboard is the gate

Many Melbourne homes have a switchboard with two or three circuits, ceramic fuses and no safety switches. A kitchen renovation triggers current rules for new circuits: RCD protection, correct cable sizes and a board with room to grow. If the board is full or old, add its upgrade to the budget up front. Related: switchboard upgrade cost and signs your switchboard needs upgrading.

Also check the service to the house. A single-phase supply with a small main fuse can run a modern kitchen if the rest of the house is modest, but combine induction with a ducted heater, an EV charger and an electric hot water unit, and the main fuse starts to matter. We carry out a simple load calculation before quoting. See home electrical load calculation.

Guide prices

These are guides only for 2026; every kitchen and every house is different.

  • New dedicated circuit for an induction cooktop or wall oven: commonly several hundred dollars to a thousand or so, depending on distance from the board.
  • Dishwasher and rangehood powerpoints: usually priced per point, a couple of hundred each.
  • Downlights, supplied and installed: priced per light. See LED downlight installation cost.
  • Under-cabinet LED strip with driver and switch: typically a few hundred dollars.
  • Extra double powerpoints on the benchtop and island: a couple of hundred dollars each, more for pop-ups. See powerpoint installation cost.
  • Switchboard upgrade if required: often the largest single item, from a couple of thousand dollars upward.

Sequence with other trades

Electricians go in at three moments. First, before the walls are lined and the cabinets set, when cables are run to every point and circuits are routed to the board. Second, after the plasterer and before the tiler, to confirm positions of powerpoints against the splashback height. Third, after the cabinetmaker and stone are done, to fit off, test, and finish. The gas fitter disconnects the old cooktop, the plumber moves the sink, the carpenter hangs the rangehood, and the electrician hooks it up, which is why a missed communication on rangehood position can mean a rework.

Give your electrician the cabinet drawings. Where a powerpoint goes behind a fridge, where an under-bench appliance plugs in, and whether the island needs a floor box are all decisions that are cheap on paper and expensive after the stone is cut. Related: new build electrical stages.

Certificates and compliance

New circuits and board changes are prescribed work. You should receive a Certificate of Electrical Safety, and your builder or certifier may ask for it for a final inspection. Related: Certificate of Electrical Safety. Smoke alarms in the kitchen-living area are checked at the same time, and should be the right type, as per smoke alarm laws in Victoria.

Hidden costs we flag early

  • Asbestos-era switchboards: older boards with fibre-backed panels need testing before we work on them, and removal adds time and cost.
  • Roof space access: a low pitch or a flat roof makes cable runs for downlights slower.
  • Insulation: downlights need clearances or fire-rated covers in the ceiling. Related: LED downlight installation cost.
  • Earthing and bonding: old kitchens with metal plumbing may need bonding brought up to current standard.
  • Smart appliances and Wi-Fi: a network point for an oven or fridge is a data cable, which is usually a separate low-voltage job.

Ask us for the electrical scope in writing, with each circuit described. It avoids the awkward moment when an expected circuit turns out to be an extra.

FAQ

Can I keep the old oven circuit for induction?
Sometimes, if the cable and breaker suit the new load and the conductor is copper in good condition. We check before you buy.
Do I need three-phase for a home kitchen?
Usually no. Many induction cooktops can be wired across two phases or limited by power sharing. Three-phase is a house decision, not a kitchen one.
Who books the certificate?
We lodge the electrical certificate for our work. Your builder handles the building paperwork.
Can lighting stay on the old circuit?
Often yes for a handful of lights. A bigger LED scheme or a lighting upgrade is a good moment to put it on a new circuit.
Inner vs growth suburbs?
Inner suburbs like Fitzroy, Richmond and Carlton tend to have older boards and tricky roof access. Growth suburbs like Point Cook and Craigieburn have newer boards but tight builder timelines.
Does an island with powerpoints cost extra?
Yes. Pop-up or flush-mounted island power needs conduit and a path under the slab or through the cabinet, so plan it before the benchtop.

See electrical, power point installation, switchboard and safety switch upgrades, electrician in South Yarra and electrician in Point Cook.

Renovating a kitchen?

Send us the plans and we will price the circuits and board first. Call 1300 24 11 47.

Need a Melbourne electrical technician?

We're one call away — 24/7 emergency service, live answer, upfront pricing.